Speed factor Basic kit GB questions/concerns
Guest
Posts: n/a
Re: 2004 ABQ BBQ - Who's Coming? (ABQ = Albuquerque New Mexi
sorry to make this thread, but i think its a good place for everyone in on the GB for the turbo kit to list there questions, comments and concerns...
First off, Tim, don't think im not gonna buy it or pay you.. here is my plan.. i applied for a CC 2 weeks ago, and have good credit, so i just need it to be approved.. i called bank today to see what was up, and they said to just wait a week or so and i should get the info i need. Once i have the card, i will pay you all at once.. I am trying to get this ASAP so i can get you your money.. Is this OK??
Secondly, i asked in the GB thread but didn't get a real answer.. Do u think someone mechanically inclined would be able to bolt this kit on and get it running in a day. .i have/will have more parts (i.e. pistons, injectors, fuel pump, clutch, SAFC) but they will be going in a diff. day so i can split it all up.
I will try to get a dyno/ track times of before the kit, and after the kit.. what psi would u want me to run it at? so people can get a basic figure?
First off, Tim, don't think im not gonna buy it or pay you.. here is my plan.. i applied for a CC 2 weeks ago, and have good credit, so i just need it to be approved.. i called bank today to see what was up, and they said to just wait a week or so and i should get the info i need. Once i have the card, i will pay you all at once.. I am trying to get this ASAP so i can get you your money.. Is this OK??
Secondly, i asked in the GB thread but didn't get a real answer.. Do u think someone mechanically inclined would be able to bolt this kit on and get it running in a day. .i have/will have more parts (i.e. pistons, injectors, fuel pump, clutch, SAFC) but they will be going in a diff. day so i can split it all up.
I will try to get a dyno/ track times of before the kit, and after the kit.. what psi would u want me to run it at? so people can get a basic figure?
Senior Member
Joined: Jul 2004
Posts: 355
Likes: 0
From: Jefferson Hills Pa
Re: Clearing Out the Shed
Maybe it would help if you could just post anything that would be needed to install this kit (parts i mean) that dont come with the kit...like fuel pump or the slimline fans that way we all know what we are up against before we rip apart and find out we need something thanks
Guest
Posts: n/a
Re: front lip / front bumper
from what i know, u can bolt this kit right up, utilizing everything in the kit, and be good to go.. if u want to run higher boost, run more efficient, you can go my route..
heres my list of stuff..
this Speed factor basic kit w/ FMIC
APexi SAFC
440 cc injectors
8:1 walbro pistons
high flow fuel pump
Spec III clutch kit
EGT guage
oil pressure guage
by the way i am in detroit MI. i will prob be venturing down to nicks house (dweet) to have him help me out with certain things.
heres my list of stuff..
this Speed factor basic kit w/ FMIC
APexi SAFC
440 cc injectors
8:1 walbro pistons
high flow fuel pump
Spec III clutch kit
EGT guage
oil pressure guage
by the way i am in detroit MI. i will prob be venturing down to nicks house (dweet) to have him help me out with certain things.
Senior Member
Joined: Mar 2006
Posts: 9,172
Likes: 0
Vehicle: 2001/Hyundai/Tiburon
Re: 2004 ABQ BBQ - Who's Coming? (ABQ = Albuquerque New Mexi
socks, if you're planning on going bigger, maybe see if tim would throw in the equal length manifold instead of the log one for some more money.
Guest
Posts: n/a
Re: Wont start... *sigh*
QUOTE (tibby01)
socks, if you're planning on going bigger, maybe see if tim would throw in the equal length manifold instead of the log one for some more money.
i think ill be fine.. daily ill be runnin btwn 10-12 psi.. and maybe 16 at the track..
i just want a good boost.. nothing HUUGE. thats y i went with this kit.. and i can trust tim.. i like the t3super 60 cuz it has good spooling.. the log style should be fine.. if nething i NEED a custom strait cat back system..
Senior Member
Joined: Jul 2004
Posts: 355
Likes: 0
From: Jefferson Hills Pa
Re: parts
im actually #6 on the list last min add on oops.gif but im from pittsburgh pa
ok time for me to sound like a newbie this kit is direct bolt on... BUT we do need slimline fans for the rd2 correct? was jumping back and forth between the post and just wanna make sure laugh.gif
ok time for me to sound like a newbie this kit is direct bolt on... BUT we do need slimline fans for the rd2 correct? was jumping back and forth between the post and just wanna make sure laugh.gif
Senior Member
Joined: Apr 2003
Posts: 2,241
Likes: 0
Re: FS : miscellaneous parts
ok. i recommend anyone getting this kit a 190 fuel pump, also i cant remember if the kit came with a FPR, if not i'd recommend an aeromotive. For anyone getting the kit from Tim id ask him about getting these items from him ASAP before he places the parts order if its not too late already. HE usually can get things for a great price Also from your local auto parts store I'd pick up some spark plugs that are two steps colder. Other than that you should be good to go
Senior Member
Joined: Feb 2007
Posts: 830
Likes: 0
Vehicle: 2000 Hyundai Tiburon
Re: going back to stock, everything is for sale
QUOTE (captainSly)
01importshark, where did you get the 440cc injects?
Also, how do we adjust the boost level with the "stock kit"? Will I need a boost adjustment tool?
Also, how do we adjust the boost level with the "stock kit"? Will I need a boost adjustment tool?
No boost controller needed. Tim includes a adjustable wastegate with his turbo's so all you have to do is adjust the rod on the wastegate.
Also Tim can get you the 440 injectors but if you dont plan on going past 250 WHP the 440 are overkill!!!
