Cams Now Available On Kspec.com
Senior Member
Joined: Mar 2006
Posts: 9,172
Likes: 0
Vehicle: 2001/Hyundai/Tiburon
Split piggyback vs. standalone posts to new topic here...
http://www.rdtiburon.com/index.php?showtop...=0&#entry153588
keep it there.
http://www.rdtiburon.com/index.php?showtop...=0&#entry153588
keep it there.
Member
Joined: Jan 2005
Posts: 36
Likes: 0
Hello,
A lot of comments on thses cams.
Yes cams are very much expensive in Korea.
These prices are not increased from what customers pay in Korea.
Actual highcams (not 1.8L or XD/GT Cam) needs ECU upgrades.
Heck, ECU tuning is always nice even on stock vehicle.
ECU upgrade will be available but not any time short, honestly.
The purpose of posting these cams is for someone out there looking for a set.
If you are looking for extensive engine work, 1.8L pistons and GK head gaskets will increase the compression ratio as well.
If you are aiming for 200hp motor then 13:1 NA pistons are needed.
So if you are thinking of these cams as just your exhaust or intake, then you are wrong.
With a correct setting, 15-20 hp can be gained.
Yes it is not a big number compared to turbo's 50~100hp gain.
But if you drive 160~70 WHP Tiburon and then drive stock 130~40 WHP Tiburon, then you will be like, so slow...just so slow.
Large torque gain could be felt from 5000RPM upto 7500RPM.
I am not looking for large sales on these cams, but customers will know when they "NEED" some highcams, they will know where to look.
Thanks.
David
A lot of comments on thses cams.
Yes cams are very much expensive in Korea.
These prices are not increased from what customers pay in Korea.
Actual highcams (not 1.8L or XD/GT Cam) needs ECU upgrades.
Heck, ECU tuning is always nice even on stock vehicle.
ECU upgrade will be available but not any time short, honestly.
The purpose of posting these cams is for someone out there looking for a set.
If you are looking for extensive engine work, 1.8L pistons and GK head gaskets will increase the compression ratio as well.
If you are aiming for 200hp motor then 13:1 NA pistons are needed.
So if you are thinking of these cams as just your exhaust or intake, then you are wrong.
With a correct setting, 15-20 hp can be gained.
Yes it is not a big number compared to turbo's 50~100hp gain.
But if you drive 160~70 WHP Tiburon and then drive stock 130~40 WHP Tiburon, then you will be like, so slow...just so slow.
Large torque gain could be felt from 5000RPM upto 7500RPM.
I am not looking for large sales on these cams, but customers will know when they "NEED" some highcams, they will know where to look.
Thanks.
David
Guest
Posts: n/a
thanx david for the input.. anyway we can get some dynos on these cams, just to show us some numbers.. 100 hp from cams seems insane.... even 50 seems nuts..
i will probably be purchasing the milder version of these cams in the future.. i would just like to see some numbers or intalled testimonies.. thanx..
i will probably be purchasing the milder version of these cams in the future.. i would just like to see some numbers or intalled testimonies.. thanx..
Moderator
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
If you got to 400whp on the stock head, then I could see a 100whp gain from these cams and some good head work. Our head is that bad.
I'll probably get these once I get to the 350whp mark, but damn, that's a lot of cash to save up for.
I'll probably get these once I get to the 350whp mark, but damn, that's a lot of cash to save up for.
Thread Starter
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
QUOTE (01importshark @ Sep 12 2005, 03:20 PM)
thanx david for the input.. anyway we can get some dynos on these cams, just to show us some numbersnuts..
Probably not mang, you've seen us try to get Dyno's from Korea before.
