My Build Thread v4.0
01-01-2014, 06:31 PM
#102
Senior Member
Join Date: Mar 2006
Location: Petawawa, Ontario
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2003 Hyundai Tiburon i4
An external ignitor from an Eclipse?
I'm not sure how the Haltech works but what are your ignition capture settings?
I use a 78deg trigger angle, 5deg tooth offset, 60-2 trigger wheel and single tooth cam input...hope that helps, maybe the haltech won't fire spark unless the timing points are synced up
I'm not sure how the Haltech works but what are your ignition capture settings?
I use a 78deg trigger angle, 5deg tooth offset, 60-2 trigger wheel and single tooth cam input...hope that helps, maybe the haltech won't fire spark unless the timing points are synced up
01-02-2014, 02:22 AM
#103
Senior Member
Join Date: Mar 2010
Location: Perth, Western Australia
Posts: 358
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1999 Elantra GLS Sportswagon
After i recently got my G4GF rebuilt and the mechanic couldn't get spark or injection pulse and said he thinks it was something to do with the Haltech but what caused the haltech to crash my tuner and Haltech haven't had a issue with the platinum 500 before but my tuner came to the mechanics workshop and got it to start. Haltech said it's was caused by a dirty signal from crank trigger, there is a crank trigger issue and likely the trigger disc clearance to the sensor may be wrong ,the tuner was able to "filter" the signal.
01-02-2014, 09:41 PM
#104
Senior Member
Join Date: Mar 2006
Location: Petawawa, Ontario
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2003 Hyundai Tiburon i4
Jon,
Did you use the ACT clutch disc or one for the Beta? I am seriously considering the change to a push clutch but som thing to hold over 500tq
Did you use the ACT clutch disc or one for the Beta? I am seriously considering the change to a push clutch but som thing to hold over 500tq
01-03-2014, 06:25 AM
#105
Moderator
Thread Starter
If you convert to push, you have to use the Eclipse non-turbo clutch. Go to Atelierhp section and contact Denis about the clutch and alternator relocation kits.
01-09-2014, 10:52 AM
#106
Moderator
Thread Starter
I finally got spark, so that's cured. But, when starting the motor I can't get more than half a turn of the crank before the starter gives out. Going to need a new one.
01-10-2014, 09:44 PM
#109
Super Moderator
Look buddy, I've been working around people in all sorts of industries for a good long while now. Long enough to know that sometimes even a recognized expert needs two seconds of another set of eyes looking at a problem.
Then again, you do have to be a *little* mature to realize things like that don't speak poorly of the expert in question so
Then again, you do have to be a *little* mature to realize things like that don't speak poorly of the expert in question so