Fs: Complete Turbo Kit, Included All Goodies
On the slim chance you part out, I'm interested in the following:
Garrett T3/t4 50 trim with ~2000 miles on it
38mm tial wastgate with dump tube
HKS SSQV BOV
Turbo intake piping with ICAV tap and IAT tap
Aeromotive FPR with all lines and fuel pressure gauge
MAP sensor and harness for secondary fuel rail.
Beta II oil pan with welded fitting for return line (pan modded to fit beta I block)
Oil return and fee lines
Megan racing boost, oil pressure, oil temp gauges
The rare FG 3 pillar pod painted flat black
PLX m300 wideband o2 kit
I already have a manifold and denissts dual rail kit, injectors, and IC but am looking for pretty much everything else.
Garrett T3/t4 50 trim with ~2000 miles on it
38mm tial wastgate with dump tube
HKS SSQV BOV
Turbo intake piping with ICAV tap and IAT tap
Aeromotive FPR with all lines and fuel pressure gauge
MAP sensor and harness for secondary fuel rail.
Beta II oil pan with welded fitting for return line (pan modded to fit beta I block)
Oil return and fee lines
Megan racing boost, oil pressure, oil temp gauges
The rare FG 3 pillar pod painted flat black
PLX m300 wideband o2 kit
I already have a manifold and denissts dual rail kit, injectors, and IC but am looking for pretty much everything else.
no.. lol.. sorry. my car wont be coming down here.. someone will either hopefullky buy it off here, or ill sell it to someone local to my old hometown.
alright, i got some new revised pricing. i MAY part this out if every part gets claimed.
i will need no stock parts in exchange (i would just sell tib afterwards needing stock exhaust/intake, or get the stock parts myself)
the pricing is as follows and DOES NOT include shipping. will ship through any service that is requested.
650$ - AIR RAM IM and GTR 61mm throttle body
350$ - Emanage blue loaded with 8psi maps, plug 'n' play ECU harness, injector harness, ignition harness, MAP sensor, MAP sensor harness
200$ - Greddy e-01 Emanage programmer (you can save up to 3 hours of datalogging on included SD card, change maps, create maps, etc)
350$ - Dual fuel rail kit with all lines and fittings. comes with 4-340cc injectors
300$ - Garrett t3/t40e 50 trim turbo. exhaust side painted black, compressor side painted graphite ~2000 miles on turbo
200$ - Koyo radiator ~12 months old GREAT condition. comes with one pusher and one puller slimline fan
150$ - IC piping with HKS SSQV BOV
75$ - 24" x 6" x 2.5" finned intercooler
30$ - all neccesary couplers and clamps
175$ - full turbo back mandrel bent, under axle exhaust
75$ - 38mm TiAL wastegate
50$ - Greddy Turbo timer
100$ - PLX M-300 wideband system
60$ - beta II modded and tapped ban
150$ - Megan RACING EGT gauge with prob, oil temp. gauge, oil pressure gauge, boost gauge (all come with sensors)
10$ - oil filter sandwhich plate
50$ - the rare FG triple pillar pod, painted flat black
30$ - turbo intake with filter
50$ - turbo XS dual stage boost controller
100$ - Aeromotive FPR with lines and rail fitting
alright, i got some new revised pricing. i MAY part this out if every part gets claimed.
i will need no stock parts in exchange (i would just sell tib afterwards needing stock exhaust/intake, or get the stock parts myself)
the pricing is as follows and DOES NOT include shipping. will ship through any service that is requested.
650$ - AIR RAM IM and GTR 61mm throttle body
350$ - Emanage blue loaded with 8psi maps, plug 'n' play ECU harness, injector harness, ignition harness, MAP sensor, MAP sensor harness
200$ - Greddy e-01 Emanage programmer (you can save up to 3 hours of datalogging on included SD card, change maps, create maps, etc)
350$ - Dual fuel rail kit with all lines and fittings. comes with 4-340cc injectors
300$ - Garrett t3/t40e 50 trim turbo. exhaust side painted black, compressor side painted graphite ~2000 miles on turbo
200$ - Koyo radiator ~12 months old GREAT condition. comes with one pusher and one puller slimline fan
150$ - IC piping with HKS SSQV BOV
75$ - 24" x 6" x 2.5" finned intercooler
30$ - all neccesary couplers and clamps
175$ - full turbo back mandrel bent, under axle exhaust
75$ - 38mm TiAL wastegate
50$ - Greddy Turbo timer
100$ - PLX M-300 wideband system
60$ - beta II modded and tapped ban
150$ - Megan RACING EGT gauge with prob, oil temp. gauge, oil pressure gauge, boost gauge (all come with sensors)
10$ - oil filter sandwhich plate
50$ - the rare FG triple pillar pod, painted flat black
30$ - turbo intake with filter
50$ - turbo XS dual stage boost controller
100$ - Aeromotive FPR with lines and rail fitting
is your car in MI? ive been wanting to go to detroit on the next drive i take for a weekend getaway. if you get all the parts gone but a few i could most likley get you all the stock parts youd need all youd have to do is make me a list. and i already got the Alt. on the list wink1.gif.




