I couldn't find the mileage posted. Is it 87,000 or so? Couldn't tell by pic.

Oh, and get a tripod, or rest the camera on the top of the backseat... crazy blurry!

 

Socks: Well that's great news from my point of view. I know I priced it so low because of the work left into it, but I figured it would be pretty reasonable for a job half-done. I mean really, if it came down to it, if you wanted to find a crashed Tib or something and just replace the interior, you could turn it back to stock fairly easily.

Majik: I just ran out there, the Odometer reads 85490. I doubt that's going to change either, I'm not exactly driving it any.

Thank you all for your interest.

 

this will go out to anyone on here..

if anyone is interested in boosting, and wants all this turbo stuff , if i buy this car, i will sell you ALL the turbo stuff, including the downpipe, etc. for 1400$ shipped, anywhere in the USA.

that would be turbo, DP, intake, piping, intercooler, FPR, fuel gauge, other gauges, etc.

i figure it would cost me about 800$ to ship it here, and in the end, i would be paying for a car with no intake/exhaust.

although, i would only be willing to be pre-paid before the car was in my hands to prevent people from backing out.

working on pending deal with turbokit buyer from me if i buy car..

 

Socks: Yea I mean whatever you want to do. Just have someone show up with cash, and let me know ahead of time. Let me know if you need my number.

 

if i end up getting it, ill arrange pick up, and will pay you via paypal + 3%, or cashiers check, w/e floats your boat.

and the reason i would sell the kit is nothing against the parts that are on it. i would just wanna put all of the stuff i sell on it to kinda 'represent' haha.

 

Socks: Yea that's fine. Cashiers check I guess would be best for me..I haven't used Paypal since I bought all the parts for the car. Obviously it's still open for anyone to buy until that point, but you can do with it what you like if you end up getting it.

Like I said, it is still for sale. I am not going to do the whole "dibs" thing with this sale. Money talks. I hope that doesn't come off wrong to anyone, but that's just what I need to do when selling something like this.

Thanks again for your guys' interest.

 

also, could i get full details and some more pics?

BOV style/brand/type

IC size

full parts list.

understood about the money talks.. i wont be to hurt if someone else picks it up, this is just a very good deal, and good help me develop some new stuff.

 

Some of the following is currently off the car, as I was going to pull the whole motor, and quit halfway through. I wanted to spray some rust preventing stuff (that's why the interior is currently gutted as well)

Aftermarket Parts List
JDM Cold Air Intake
Shark Racing 2.5” stainless steel cat-back exhaust
Skark Racing Stainless Steel High-Flow Catalitic Converter
Audiovox PAV2000 7” LCD TV
EZClutch Stage 1 Clutch kit (starting to slip)
OBX Power steering pulley
OBX Water pump pulley
T3/T4 AR.63 Turbo with internal waste-gate
Front-mount intercooler
OBX Stainless steel t3/t4 turbo header
Greddy Style SSQV Blow off valve -- this BOV is awesome, no probs w. the knockoff at all.
Manuel Boost Controller
Vision 9mm Iridium Spark Plug Wires
OBX Iridium spark plugs
Boost Gauge
Air/Fuel Gauge
Oil Pressure Gauge
Glow Shift 3 Tier Pillar Pod


Other Mods
Complete Removal of all A.C. equipment (A.C. pump, lines, aluminum cooler)
Removed Backseat, including all brackets for seat and seatbelts
Custom made spacer after O.B.X. Turbo Header to give room to the turbo (more specifically the waste-gate, as it was hitting my crank/knock sensor)
Custom Made brackets holding intercooler in place
Custom made intercooler piping from turbo to intercooler, and from intercooler to Greddy Style SSQV B.O.V. The remaining piping from the Greddy Style SSQV B.O.V. to the throttle body was modified from the aftermarket JDM intake.

Other
There were obviously other costs in building this car. Necessary items that were cheap and simply not worth mentioning are not listed above. A good example of this is vacuum line splitters to runs vacuum to turbo and B.O.V.

 

if you could take some more pics that would be great. i will keep in touch in the next couple of days.. if you get an offer tho, take it, cuz i still need to get a few things figured out.

 

I'll get out there after work tomorrow. They'll be posted about this time. Let me ask you this: is there anything in particular you need a picture of? I've tried to be as up front as I can by posting all these pics thus far. Any I take 2marow will be of the exact same product, just a bit dustier because it hasn't been out of the garage yet this year. I can get particulars for you, and I will, but please don't have me going to work for nothing..you know what I mean, I don't mean to sound like a jackass.