Automatic Aftermarket Shift knobs
Ima newbie at the whole posting thing, but is there a way to remove the automatic shift knob and replace with an aftermarket one on the 2000 elantra. thanx alot peps
Hey,
I have a 2000 Elantra, and the MOMO auto shift knob goes on soooo easy. Here is a pic of it installed:
http://mywebpages.comcast.net/quark47/late...ely/boxside.JPG
Message me back and I'll give you directions if you're interested.
---------------
Joe Bongiovanni
Elite Division Marketing
www.elitedivisionmarketing.com
I have a 2000 Elantra, and the MOMO auto shift knob goes on soooo easy. Here is a pic of it installed:
http://mywebpages.comcast.net/quark47/late...ely/boxside.JPG
Message me back and I'll give you directions if you're interested.
---------------
Joe Bongiovanni
Elite Division Marketing
www.elitedivisionmarketing.com
Here is the picture of mine:
I have a 2001 tiburon and i remember i was trying to help someone with a 2000 tiburon do this mod and had problems halfway through. So they are different....i don't mind doing a how-too or anyting like that, i just don't want the same thing to happen to you. Feel free email me if you have any questions or what ever: Lenard10@hotmail.com
.....
oh yea, that red switch that is mounted in the coin holder is where i put my overdrive switch....later
MATT
[ March 11, 2003, 09:49 AM: Message edited by: Emagdnim ]
I have a 2001 tiburon and i remember i was trying to help someone with a 2000 tiburon do this mod and had problems halfway through. So they are different....i don't mind doing a how-too or anyting like that, i just don't want the same thing to happen to you. Feel free email me if you have any questions or what ever: Lenard10@hotmail.com
.....
oh yea, that red switch that is mounted in the coin holder is where i put my overdrive switch....later
MATT
[ March 11, 2003, 09:49 AM: Message edited by: Emagdnim ]
Thats not CF he color matched his interior to the stock paint.The question I have is what did you do with the overdrive button? I put a aftermarket knob on too but its a obx with od button and I'm not feeling it now that its installed.
Okay cool, is there anyone out there that didnt rewire the switch or just left it off? Now that i found out that some one else has done it with no problems how do you get the stock shifter off.
thanxs again wink
thanxs again wink
I left my OD switch disconnected.I figured out which 2 wires are being used to keep the OD turned on,then I shorted those 2 together.So,it's permanently in OD........can't turn it off.Which as far as I'm concerned is no biggie.


