Group buy on HONDATA GASKET!!!!!
Thread Starter
Moderator
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
This is an awesome group buy already going on at NewTiburon.com and they neglected to post it anywhere else:
http://www.newtiburon.com/forums/showthread.php?t=6267
$60 for a great mod.
http://www.newtiburon.com/forums/showthread.php?t=6267
$60 for a great mod.
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Yeah, for 40 bucks it's a thicker "Phenolic Spacer", and not a gasket. Let me email that guy again and tell him I'm gonna start it.
*EDIT:*
Okay, emailed the other guy on the deal, he should be back to me shortly.
*EDIT:*
Okay, emailed the other guy on the deal, he should be back to me shortly.
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
They lengthen the intake runners and increase air velocity into the head, increasing power. They also almost CANCEL the heat transfer between the block and the IM, vastly reducing the intake temperatures and increasing power. Results are usally around 5% and much more throttle responce, not to mention, drops of intake temps around 75 to 100 Degrees.
On the bad side, depending on the thickness of the spacer, you may have to put in new studs.
On the bad side, depending on the thickness of the spacer, you may have to put in new studs.
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Members
Yeah, I registered there just to keep the whores from phreaking my name.
It's neat at first, but confusing.
It's neat at first, but confusing.
Senior Member
Joined: Aug 2003
Posts: 2,436
Likes: 0
From: Rockville, MD
....
REDZ, I have been interested in the Airram IM from kspec.
w/ the phenolic spacer would the IM be pushed back enough to clear a motoria (AOS) Front strut bar?? I know there have been clearance issues w/ it.
the spacer, IM and matched TB will prob be my next HP mods if so.
w/ the phenolic spacer would the IM be pushed back enough to clear a motoria (AOS) Front strut bar?? I know there have been clearance issues w/ it.
the spacer, IM and matched TB will prob be my next HP mods if so.
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Hmm...
Good question. I guess I'd have to see where the IM and the Strut bar are in relation to eachother first.
The Motoria SB should fit over the Airram IM.
Good question. I guess I'd have to see where the IM and the Strut bar are in relation to eachother first.
The Motoria SB should fit over the Airram IM.
