tdonnell

So I should stay with the stock bore of 82mm then. Ok, I should be able to hone out the block without making the bore that much larger correct? I can get my old boss to do it at his engine machine shop prolly for free, so no ball hones here - not that they wouldn't work. Anyway, would H or I beam be stronger? So, the pistons and rods will be $1600 for both if we get less than ten. And I will just assume that these rods and pistons are forged and very high quality. I am definately interested, but like they said, I will need a couple of months to get the money together. The pistons come with wrist pins correct, and are the lock rings spiral or C style? Thanks Jon.

'treezy

same questions as avobe John...

forged pistons?

what will be the final price for stock sized pistons and rods if we somehow got 10 people.

And if I wanted larger than stock size I would add $157 to the price of the answer to ^that question. ??

mb499

Wow so confusing O_O;

I'd be in once im 100% sure im going turbo.
If there's a long/no timeframe then im interested, depending on how money issues go.

purpletib

Hmmmm. May be interested, but probably not for a full year man. I guess that would mean I'd be buying after the group buy.

renante

<div class='quotetop'>QUOTE (Mad_john @ Oct 18 2005, 10:13 PM) <{POST_SNAPBACK}></div><div class='quotemain'>I have worked out this deal with crower to make use R&P for the our tibbys na/turbo

i need at least 10 people the more the merry, they want 800 per set and they have the abitlity to hold up to 800 hp eather I or H beam type turbo or NA

after 10 people the price will drop to 678+ shipping this is 200 dollors cheaper then if you call them your self

and the pistions will go from 642 to 540 turbo or na also this is a 150 buck extra if you order customs stuff and as far as i know not to many stock our shit
i want to know whos in on this...
this is a test run to see who is willing
as for the shipping i can eather send it direct to you from crower or to Redz</div>

If these are a SET OF PISTONS/ROD with rings, pins priced between $678 - $800.
To suit my car, which is a hyundai coupe 1997, 1.8 litre engine turbocharged.

I'm interested of buying and can have the payment by the end of November 2005.

Could you please confirm these details.
- how long does it take for them to manufacture and deliver to Australia?
- cost of the USPS airmail
- is this group buy still available
- payment method, paypal?

iQfOreVa

the RODS are $678.00 plus shipping (10+ people)
the PISTONS are $642.00 to $540.00 (10+ people)


this is what i gather from the information put out.

Mad_john

^ that is correct

i need at lest ten maybe even 8 i want to get the price down as much as i can


because i need a spar set i am going to try to make a street 850 WHP i allready have the tranny getting made...

we got two choices ether i have them ship them to me and then i turn around and ship them to you "mitlary discout" to you guys also i know if it goes through the APO here it will get to you in a week and it wont get riped off...


PM me if you are in and when you will have your mighty dollors ready because it will take them 8 weeks to make and i got a internet phone here so you dont have to call internainal here it is 9032589679

john magoon

iQfOreVa

i hate to burst your bubble john...but there is absolutely ZERO percent chance that you'd get this group buy off the ground. people around here have a hard enough time comming up with $400 let alone $1200.

'treezy

^just to prove IQforeva slightly wrong. I'm in

well, I'm only slighlty in...cuz I want to wait and see what prices FlyRyde can get us pistons/rods for...

IF I was in, I'd be in before the end of the year. wink1.gif

BIGTRE13

I'd be in also but not until the new year sad.gif