looking for hubcentric rings

 

you can find polycarbonate ones on ebay for CHEAP. they work great and wont rust:

http://cgi.ebay.com/ebaymotors/HUBCENTRIC-...sspagenameZWDVW

 

it would be nice if you got rings that would fit YOUR setup...

After all... that is the purpose..

Go and get the measurements and find out what you need...

 

ok, so heres a few questions.
whats is the stock measurements for a 98 tibby? and how do i know what i need for my specific rims what do i measure on it?

 

dude, look at the ebay auction... mad.gif

# INNER DIAMETER: 67.10mm = Mitsubishi 3000gt 91-99, 3000gt VR4 95-97, Galant 89-03, Eclipse 89-03, Miarge 88-92, Lancer LS & OZ 02-03, Diamante 94-03
# OUTER DIAMETER: 73.1mm Fits most 85% aftermarket wheels: ENKEI/VELOX/RH/ADR/RSL/&MORE! Double check with your rim manufacturer!

the inner diameter is the measurement that is specific to the car. our hubs have an outer diameter of 67.1mm. most a/m wheels have an opening for the hub that is 73.1mm.

if you want to double check, go measure the diameter of the opening for the hub in your wheel, but it will more than likely be 73.1mm.

 

I just found these too.

http://cgi.ebay.com/ebaymotors/HUBCENTRIC-...992711552QQrdZ1