The R&D is complete, they look like a million bucks -

changes since the prototypes
1) made tach oval smaller to fit
2) made arrows instead of holes for turn signals
3) etched out areas around pins so stock pins can be used.
Complete

because of the amount of material used to make these bezels, they will be 30 dollars shipped and will be available on our website and eBay in a few days
available in Red, Blue, White, Black, and Brushed Aluminum colors - you can have anything you want etched on them in any visible area - we can do text in an arc above any of the bezels, or in the stock location between the turn signals.. We will have a "Premium Fuel Only" one completed, that text will be in the area below the fuel gauge, for those who are boosted..Hope you appreciate how much work went in to these by several members...

http://aycu40.webshots.com/image/113...2929609_rs.jpg

EDIT:

They are ready!

COME GET EM!

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=290084297140

just wanted to clarify, these are for the mph clusters. i believe nate is working on a kph speedo ring for us now so hopefully that will be available in the near future. thanks

Wow! Those look great! Thank you for supporting us and thanks to the members who helped get this one going!

These ROCK!

Can't wait for the KPH ones to be available. The arrows for the turn signals look a lot better, however are these the exact same size as the arrows in the OEM gauge faces? If so, I wonder if these are going to work with the arrows in my Maxtrims. I'll do a comparison later to see if there's any difference. I guess as long as the light allowed to come through the arrows in the face is larger than the arrows in the gauges then it should be fine.

AWESOME JOB EVERYONE WHO WORKED ON THESE!

Your going to make me pull apart my dash.... again? 02.gif

Those look fantastic!

I absolutely love the look, but I have to say, I have 1 gripe: I wish there were rectangular slots instead of V shapes for the cutouts arount the outside of the speedo.

id prefer rectangles also, but ill definatly be picking up a set with either next paycheck or my state returns laugh.gif

I wonder if there's a way both could be done... since I'd imagine SOCKS original drafts had square cutouts.

Hmm...all we can do is ask smile.gif

it would be a little harder then ^ notches id think just cause the extra flat.

I think when you see them lit up, you will like the spikes better than the square ticks...

as far as the arrows go, they are the exact size as the stock arrows, I am sure the maxtrim gauges have them in the same place...

NOW... we can do a complete face in plexi too.. and once I get a gauge cluster here of my very own.. expect to see some really trick stuff for this gauge cluster.. and for you RD1 tib owners.. someone send me a cluster.. I WILL make you something

^^^
Can you get a lit up picture? smile.gif

Unholy, PM me before you send anything out to me my man. About the cluster.

Lookin fantastic.

looks very good.. i am glad we designed the pointy notches instead of the stock look..

and Caj, thats how they were designed..

i will be designing a kph cluster sometime soon, but not sure when i will get around to it.

again unholy, looks really friggin good.

WOW...... I ......Need........This.........Now........*drool*
Thanks to all who worked one these. I love you guys. In that manly friendship handshake not hug kinda way of course. lol

i want a set. do you do white? and would it be possible to do white with the rd tib. gottta represent the site that help me put this all together.

^Red, Blue, Black, and Brushed Aluminum colors

Thats what he said in his opening post

And by the way these things look awesome... Great job everyone who did this, great job

nm black would look better with my scheme. just thought if they could do those other base colors maybe white was a possibility too, but yeah.

Nice! fing02.gif I like them. Sending you a PM about a RD1 cluster...

Okay, I'm talking to Unholy right now, who's got a spare RD1 cluster they can send him?

<div class='quotetop'>QUOTE (proen @ Feb 14 2007, 05:32 PM) <{POST_SNAPBACK}></div><div class='quotemain'>i want a set. do you do white? and would it be possible to do white with the rd tib. gottta represent the site that help me put this all together.</div>


I can do white if needed.... it will be offered...

They look amazing!!!
Does engraving/writing on it cost any extra?

can we pre-order smile.gif and is the RDtib logo on all of them? is custom an option also?

I have one, as I said in the PM, but it's in a parts car and I'm unsure what condition. However, if you can use it then it's yours.

<div class='quotetop'>QUOTE (xxxmonoxidechild @ Feb 14 2007, 07:04 PM) <{POST_SNAPBACK}></div><div class='quotemain'>can we pre-order smile.gif and is the RDtib logo on all of them? is custom an option also?</div>

READ THE THREAD

<div class='quotetop'>QUOTE (SplinterCeL @ Feb 14 2007, 05:08 PM) <{POST_SNAPBACK}></div><div class='quotemain'>I have one, as I said in the PM, but it's in a parts car and I'm unsure what condition. However, if you can use it then it's yours.</div>

See what kind of condition it's in. He can use it.

i have one otherwise. just cant have it gone to long. i can put my rd2 cluster in until i get it back. let me know if im needed

only thing is it has el gauges in it, dont know if that matters for what you want? just let me know

https://img.photobucket.com/albums/v...L/100_0412.jpg
It is missing 2 screws, one for the lighting that connects from the back and 1 that holds the tachometer from the back, and a couple of bulbs. However, if this one will work let me know and shoot me a PM with an addy to send it to.

Looks like that would work fine my mang. I'll PM you the addy when I get home.

They are ready!

COME GET EM!

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=290084297140

Bump and stickied.

Buy em up guys.

Amazingly enough, I just got notified that no one has bought one yet.

You kidding me?

Immediately after valentines day wasn't exactly the ideal time for releasing these. I love my tib as much as the next guy but all my money went towards my girlfriend this week.

ill be buying one as soon as i get paid, going to the chicago hyundai meet kinda wiped me out cash wise.

im buying one as soon as the kph versions come out

<div class='quotetop'>QUOTE (tiburonmoo @ Feb 19 2007, 01:50 AM) <{POST_SNAPBACK}></div><div class='quotemain'>Immediately after valentines day wasn't exactly the ideal time for releasing these. I love my tib as much as the next guy but all my money went towards my girlfriend this week.</div>

LOL

Good point.

<div class='quotetop'>QUOTE (Vladimer @ Feb 19 2007, 10:51 AM) <{POST_SNAPBACK}></div><div class='quotemain'>im buying one as soon as the kph versions come out</div>

what he said

sent unholy a pm about the kph ones, when i get the final version of the gauge file, ill modify it for the kph ones.

Yeah once I get paid at the end of this week I am going to buy these. They look amazing

im in for sure for the kph. when you post the kph on your site, will you say witch is mph an kph? Right now if you go to your site it doesn't say anything about it only being in mph

Yeah, I definitely want a set, but need the KPH.

I wonder what sort of ideas you have for us RD1 guys?