cool beans

 

come on guys, I thought the demand would be alot more for these. Still havent' heard from those who started and posted in the other wanted thread so fing02.gif

 

Hit up Sparticus and he'll get it on the front page for you, not to mention he can have it put in a site email.

I'd be up for them, and was, until I got my MS Standalone ECU. Now I've got all the gauges I could need on a LCD screen. LOL

Let me know if you don't get enough, I'll buy a set to sell later or maybe just get pillar blanks.

 

They should be selling more so lets get it out there Redz. And I would like to see how your current setup is as well.

Bump for more interest on these.

 

Mine won't be much of anything till I get a carpc or a laptop in there.

 

CD...

I was looking at my gauge pillar pod I was going to send to you to use as a mold a long time ago and just realized a few things about it. there are several of us right now that prosport gauges for our cars. these guage housing are rather big and in fact only one of three will fit in the cut holes in my pillar pod right now. measuring from the lip bezel to the rear of the gauge you need 2.25" of clearance and the housing is 2 inches in dia.

I know Ericy has a set of prosport gauges waiting for your pod right now, just thought i would throw out that little tidbit of info so you don't have alot of mad customers .

Lee

 

The prosports are bigger you are saying? Hmm. I would like to know how these will be setup. Maybe even if we can enlarge the holes somewhat when they come.

 

I test all the holes with std autometer gauges which are 2 1/16" and

The diameter will be fine as they are both 2 1/16" (52mm) I'll check the distance to make sure the Prosports will fit also though. Can you confirm that the Prosports are 2.25" from the lip to the max end of the gauge ?

 

sure can bud...here you go...





I know i said 2.25" but i was allowing .125" for some play. these gauges do came with a angled blinder to take the glare away from the sun but i don't know if I will be using them. the bolts on the back are recessed far enough from the edge that they WILL NOT come into play with the O.D.

 

any updates?