New and former turbo pics
02-25-2002, 01:11 AM
#2
Senior Member
Join Date: Jul 2001
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
Hey Onpol, sorry I didn't get to post those pics last friday. I had to work some this weekend as well and it slipped my mind.
But if Random has them now, he can post them on this server (which is much better than mine).
What are the new specs for your turbo?
ac
But if Random has them now, he can post them on this server (which is much better than mine).
What are the new specs for your turbo?
ac
02-25-2002, 07:37 AM
#3
Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
The new turbo is a TO3/T04 hybrid. .63 standard trim on the hot side and S trim on the compressor wheel.I bought it from a known guy who wrecked his 2 weeks old built turbo mirage.Yes smile.gif 2 weeks old turbo and deltagate wastegate for $400 bucks is more than a deal it is a steal.I'm just waiting for the pistons to arrive to put together the engine after boring and balancing everything.After a year of abuse the only part that was bad inside the engines were the oil rings and valve guides.Thats why my motor was doing blow by and spitting the oil stick out.
02-27-2002, 03:07 PM
#8
Super Moderator
Join Date: May 2001
Location: Rancho Palos Verdes, CA
Posts: 11,851
Likes: 0
Received 2 Likes
on
2 Posts
Vehicle: 2008 Toyota Prius 2006 Suzuki SV650S
QUOTE
Originally posted by Rich:
Is your engine MAP or MAF?
MAFIs your engine MAP or MAF?
QUOTE
Originally posted by white-shark:
hey onpolllll!! where did you buy the pistons?? y the rods?? the turbo? I want to do the same thing jeje!!!!!
hey onpolllll!! where did you buy the pistons?? y the rods?? the turbo? I want to do the same thing jeje!!!!!
He was running on stock Pistions and rods with that setup. Not sure what he's using now. The Turbo is available LOTS of places on the net. The Turbo Manifold is available from Cheuk.
02-27-2002, 04:48 PM
#9
Senior Member
Join Date: May 2001
Posts: 1,436
Likes: 0
Received 0 Likes
on
0 Posts
Last I checked, he was buying the same pistons and rods as my project. He's already got the Haltech and he's also got the T3/04 turbo...
You'd think we were doing the same buildup wink.gif
In all honesty we're not, but it's funny how we both gravitated to the exact same things. What's the best way to make insane horsepower?
-Red-
You'd think we were doing the same buildup wink.gif
In all honesty we're not, but it's funny how we both gravitated to the exact same things. What's the best way to make insane horsepower?
-Red-
03-01-2002, 01:39 PM
#10
Senior Member
Thread Starter
Join Date: Jul 2001
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
That set up in the pics is the old one.I'm rebuilding almost everything.First i ordered pistons from Ross 9:1 with 82.5 of bore,this may sound familiar smile.gif Thanks Red.I'm running an Haltech E6K on my car for Engine management.The new turbo is a hybrid good for 400 HP easy.I got 850 cc injectors.255 lthr fuel pump.I'm getting my engine balanced and blueprint.The head is gonna have a slight porting job and a stage 4 clutch is on the mail,the exhaust piping is 3 inches from the turbo to the APEXi N1 turbo muffler,the intercooler is from an truck.I will tune my car to 340 wheel HP and leave it there.I don't want to go any further cuz i'm sick of breaking tranny parts and spending $.I'll wait for the Quaiffe LSD and then try to get it to 400 WHP mark. Thats All smile.gif