My Turbo project *UPDATE*
#1
My Turbo project *UPDATE*
So far i have:
Boost Controller
Intercooler
Adjustable FPR
BOV
Turbo Timer
T3 Turbo w/ internal wastegate
Adjustable Wastegate Actuator
Rebuilt Transmission
A/f Meter
Fuel Pressure Guage
-Jordan
[ September 24, 2002, 08:27 AM: Message edited by: xxTIBxx ]
Boost Controller
Intercooler
Adjustable FPR
BOV
Turbo Timer
T3 Turbo w/ internal wastegate
Adjustable Wastegate Actuator
Rebuilt Transmission
A/f Meter
Fuel Pressure Guage
-Jordan
[ September 24, 2002, 08:27 AM: Message edited by: xxTIBxx ]
#4
I hooked my gauge up to pin #12 of the ECM harness, which is the front O2 sensor input into the ECM. The color of the wire coming from the engine side is yellow if that helps any.
Keep posting on how your turbo project goes. I still have a ways to go with mine. I'll share my issues as i go along. All i have installed is a piggy back fuel/ignition management system, which im still working the kinks out of. Good luck to ya.
[ September 25, 2002, 08:19 PM: Message edited by: Sharkvelocity ]
Keep posting on how your turbo project goes. I still have a ways to go with mine. I'll share my issues as i go along. All i have installed is a piggy back fuel/ignition management system, which im still working the kinks out of. Good luck to ya.
[ September 25, 2002, 08:19 PM: Message edited by: Sharkvelocity ]