12SecRD

I was wondering if someone can confirm ignition and trigger settings for the beta. I read threw HA fourms and talked to other Haltech users and some are telling me to use FALLING for the trigger and spark edge while someone else is telling me to using Rising for the trigger and falling for the spark edge.

Thanks

ps I am using a dual ignitor and not a MSD box!

REDZMAN

Bump for Gary.

albert

I don't have my haltech info here, but I'll check the setup when I get home and post up later tonight.

albert

Sorry for the double post, but I wanted to make sure Gary saw this.

I checked Red's Map, Bry's Map and Jaws021's Map. All are set for "Rising".

12SecRD

Thanks,

Would you forward me there Maps so I can have a look at them to compare with mine?

my email addy is

garybyrne_nf@yahoo.ca


Gary

albert

email sent.

I included the exe files as these setups are done with the E6K, not the E6X You have.

12SecRD

Yea thats ok the E6X can load maps from a E6K

Thanks.

Viper966

the e6x software only loads the fuel and timing maps from e6k files... to view setup settings you have to use the e6k software... i told you this a long time ago

12SecRD

Yeah i know. I was refering to that when saying "the E6X can load maps from a E6K"

1997tibby

if you have any further questions, contact Viper966, he is definitly the MASTER with E6X setups on Tiburons!!!!