Going Turbo....
Thread Starter
Senior Member
Joined: Mar 2006
Posts: 4,135
Likes: 0
From: NAS Patuxent River, MD
Vehicle: 2004 Volkswagen Jetta GLI
Im going turbo and i was going to purchase my boys turbo off of an 04 neon srt 4. first can i use that turbo, cause instead of buying an entire kit i was go to piece it together. also i was going to buy the intercooler also, what do i need for the turbo to work, i know i would need? all together. ALSO if i buy the motoria catback would i be fine if i had the 3 inch downpipe to the to an 2.5 cat, would i lose hosepower?
Thread Starter
Senior Member
Joined: Mar 2006
Posts: 4,135
Likes: 0
From: NAS Patuxent River, MD
Vehicle: 2004 Volkswagen Jetta GLI
ok, but can i use the the neon 04 neon srt4 t30 turbo and intercooler on my car and what other parts will i need besides BOV, wastergate
Senior Member
Joined: Mar 2006
Posts: 9,533
Likes: 0
From: tacos
Vehicle: 2000 Elantra
you can use any part from any car almost
problem is your gonna have to mod it to fit
the srt4 turbo could be used but you would need a custom manifold
the intercooler might need new end tanks welded up
after that do a search its been discussed many times what else you would need for a turbo
pick up corky bells maximum boost its a good read
problem is your gonna have to mod it to fit
the srt4 turbo could be used but you would need a custom manifold
the intercooler might need new end tanks welded up
after that do a search its been discussed many times what else you would need for a turbo
pick up corky bells maximum boost its a good read
http://www.hyundaiaftermarket.org/images/vendor1.png
Joined: May 2002
Posts: 1,500
Likes: 0
From: Canada
Vehicle: x3 accent gk tiburon santa fe
2.5" is more then enough for most street car,hey.. we have dsm running low12 high 11'S with 2.5 exhaust. .why would it be different with our cars...
isn't the turbine housing part of the exhaust manifold on the srt4 ?...
same thing for the BOV,it'S part of the compressor housing
see for yourself...
looks like someone woke up this morning and had a flash about turbocharging his car cool.gif
before wanting to get spoon feed, please do a search,at least you'll know what you want and what it will invoke
isn't the turbine housing part of the exhaust manifold on the srt4 ?...
same thing for the BOV,it'S part of the compressor housing
see for yourself...
looks like someone woke up this morning and had a flash about turbocharging his car cool.gif
before wanting to get spoon feed, please do a search,at least you'll know what you want and what it will invoke
Thread Starter
Senior Member
Joined: Mar 2006
Posts: 4,135
Likes: 0
From: NAS Patuxent River, MD
Vehicle: 2004 Volkswagen Jetta GLI
what about the silcone hoses and clamps, what mm.
my boy said that is bolts off, my major question is piping
do you really need decompression plate if you are not running more the 10psi or what?
cause i just want to start at least by the end of the year cause is my only car cause me and my boys are going to get it done in a weekend in a heated...but the major thing Piping if custom right?
my boy said that is bolts off, my major question is piping
do you really need decompression plate if you are not running more the 10psi or what?
cause i just want to start at least by the end of the year cause is my only car cause me and my boys are going to get it done in a weekend in a heated...but the major thing Piping if custom right?
