Air-ram Like Manifolds?
Thread Starter
Senior Member
Joined: Feb 2010
Posts: 519
Likes: 0
From: Reynoldsburg, Ohio
Vehicle: 1998 Hyundai Tiburon
i showed a machine shop some pictures of an air ram to see if he could make one....
and he told me if i could get some exact dimensions he could make a cad and make these.
only catch is unless six or more are made the price for making just one would be astronomical.
But for six or more price would be around 400.
The more people that confirm they will order the cheaper it will be.
First i will need specs, and interest.
i am willing to front the money to get it started, but i m looking for people with money not dreamers.
and he told me if i could get some exact dimensions he could make a cad and make these.
only catch is unless six or more are made the price for making just one would be astronomical.
But for six or more price would be around 400.
The more people that confirm they will order the cheaper it will be.
First i will need specs, and interest.
i am willing to front the money to get it started, but i m looking for people with money not dreamers.
Senior Member
Joined: Mar 2009
Posts: 829
Likes: 0
From: Red Deer
Vehicle: 2012 mitsubishi eclipse spyder gs, 2001 hyundai tiburon
You bet your azz I'm interested. What do you need for specs? Maybe (hopefully) someone on the site that has one will share what you need.
Super Moderator
Joined: Sep 2001
Posts: 10,795
Likes: 5
From: Pflugerville, TX
Vehicle: 2000 Elantra
You will have to buy one if you want to get it right. That is what you call an investment. If you can come up with a steady source of knock-off airrams, you will have a steady stream of customers IF the quality and price are both good. $400 right now is probably not too bad.
Moderator
Joined: Mar 2009
Posts: 5,280
Likes: 0
From: wamego, kansas
Vehicle: 2001 hyundai tiburon
good luck....
this has only been tried like 10,000,000 times before, all ended in failure.
but...if you can front roughly the 2400 you need, and they are good in the end, you will sell them.
this has only been tried like 10,000,000 times before, all ended in failure.
but...if you can front roughly the 2400 you need, and they are good in the end, you will sell them.
Senior Member
Joined: Mar 2010
Posts: 205
Likes: 0
From: Utah
Vehicle: 2001 Hyundai Tiburon
Hmm comeon guys the least we can do is help this guy out. Well I don't have an airram to get dimensions for ya >_< but dmdicks has one that's off his car and he's trying to sell. I'm sure if you asked him he could try and get the dimensions to it smile.gif The Topic
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Yes, we could help him out, and we are helping him out. It's pretty much a lost cause.
The YOUNGEST of the beta 1 engines is what, 8 years old now? Less and less folks are tuning them, so less and less are buying parts ffor them. Instead of getting his heart broken, it's better to inform him that this has been attempted at least 10 to 15 times here, all ending with fights, lost parts, lost money, and no product.
The YOUNGEST of the beta 1 engines is what, 8 years old now? Less and less folks are tuning them, so less and less are buying parts ffor them. Instead of getting his heart broken, it's better to inform him that this has been attempted at least 10 to 15 times here, all ending with fights, lost parts, lost money, and no product.
