RD2 Parts for sale
Senior Member
Joined: Jun 2011
Posts: 495
Likes: 0
From: Bayarea, CA.
Vehicle: 1999/hyundai/tiburon
33826276.jpg
Calm down fella's single file line! Lets give him a chance to make a deal with me....Cant wait to get my hands on this AIRRAM MANIFOLD...lol...
Calm down fella's single file line! Lets give him a chance to make a deal with me....Cant wait to get my hands on this AIRRAM MANIFOLD...lol...
Senior Member
Joined: Jun 2011
Posts: 495
Likes: 0
From: Bayarea, CA.
Vehicle: 1999/hyundai/tiburon
^^^ Good question! Or any other of his items for that matter. From what I believe he said he might not waste his time taking off all his performance parts. He doesnt feel its worth his time and it might go to the junk yard with the car. If he decides to sell his items he might put them on Ebay as an auction 
! O, well....
! O, well....
Thread Starter
Senior Member
Joined: Nov 2007
Posts: 1,139
Likes: 0
From: Albany,NY
Vehicle: 2011 Tuscon
Ok folks, sorry for the delay. just wanted to list everything i could think of and it was all scattered in 3 different places.
Please understand that I did not have collision insurance on the car, so i got absolutely nothing for the crash. In fact i have a ticket that i need to pay for crashing my car. That's why the prices are on the higher end.
ALL PRICES ARE OBO
Shipping is NOT included in any price
First off the airram, I remember these going for $800 a couple years back when i paid attention, so that's what i'm asking. I cleaned the whole thing inside and out and cleaned up the flange. rd1cuda has first dibs on this and then so on down the line.
Next up is the throttle body. I swapped the stock throttle spring onto this one for a more oem gas pedal. The one that originally came on it was way too stiff imo. i couldn't get used to it after a week and your foot literally hurt after driving. I would say i could include it but i have no idea where it is. They go new for close to $300 asking $175 with the phenolic spacer. Comes with the TPS sensor that i've run on it the whole time i've had it. azngoose has first dibs on this.
Ark racing lightweight/underdrive pulleys. Crank, Water pump and p/s. P/S pulley is SPLINED, make sure yours is the same. Ark sells them new for close to $300, asking $150. I have the belt part #'s you will need with these except for the A/C belt, because i took my compressor off. also in the picture is a blue and silver, system upgrade oil cap, threaded sytle. asking $20
Motoria 2.25 catback. $100
Phenolic spacer by Outlaw Engineering, manifold only. The tb spacer had been cut to fit a 65mm tb so it will be sold with the bbtb. I also have the extended head studs that they offered as an option. I did not use them just wanted to have them incase. there is enough room on the stock studs, but just barely. will include with purchase either way. You will need 2 stock manifold gaskets with this spacer. i can include them for an extra $15. asking $20. Also in the picture is a set of smoked front markers for the rd2 front bumper.asking $10 for them.
RD carbon fiber door sills, with silver "RD" carbon weave inlay. Got in group by while back from Compact Divisions. will include new 3m tape for install. They have been on the car for several years, they do have minor scrapes that could be easily taken care of with a light grid sandpaper and polish. Don't remember what i paid for them but i'd say they're worth at least $50
Airram compatible strut bar. I know there are some ebay ones that people have gotten to fit but this was one of a hand full made, guaranteed to fit, by an older member viper996. powder coated black. I paid $90 i believe. asking $50
Next up are some body parts including, A modified oem front bumper with a gt tech lip kit that is 90% molded on to it, needs minor finishing work. let me know if your interested and we can come up with a price.
A set of gorilla widebody fenders, will fit rd1 and rd2. Drivers side still needs some work, passengers side is paint and put on. Nos4atu has first dibs on these. Hoping to get $200. don't really wanna say what i paid for them
Type R sideskirts. OEM sideskirts in korea. Tibbytib has first dibs. hoping for $75 for the pair
Just a list of stuff that i don't currently have pictures of, all of it is used.
-Sakio Mishi dual catch can $20
-Walbro 195 fuel pump $20
-aem intake (blue)$20, will need new filter
-35w 8000k HID set, literally just bought, after my first set gave in after 5years. $10
-Beta 2 valve and spark plug cover. $25
And if someone REALLY wants the Eibach pro kit springs i have (1.2 drop), ill take them out for $100. The impact side strut completely folded in half and i wasn't thinking when i organically listed it for sale.
ANY STOCK OR OEM PART THAT YOU NEED I ALSO HAVE, PLEASE LET ME KNOW.
Please understand that I did not have collision insurance on the car, so i got absolutely nothing for the crash. In fact i have a ticket that i need to pay for crashing my car. That's why the prices are on the higher end.
ALL PRICES ARE OBO
Shipping is NOT included in any price
First off the airram, I remember these going for $800 a couple years back when i paid attention, so that's what i'm asking. I cleaned the whole thing inside and out and cleaned up the flange. rd1cuda has first dibs on this and then so on down the line.
Next up is the throttle body. I swapped the stock throttle spring onto this one for a more oem gas pedal. The one that originally came on it was way too stiff imo. i couldn't get used to it after a week and your foot literally hurt after driving. I would say i could include it but i have no idea where it is. They go new for close to $300 asking $175 with the phenolic spacer. Comes with the TPS sensor that i've run on it the whole time i've had it. azngoose has first dibs on this.
Ark racing lightweight/underdrive pulleys. Crank, Water pump and p/s. P/S pulley is SPLINED, make sure yours is the same. Ark sells them new for close to $300, asking $150. I have the belt part #'s you will need with these except for the A/C belt, because i took my compressor off. also in the picture is a blue and silver, system upgrade oil cap, threaded sytle. asking $20
Motoria 2.25 catback. $100
Phenolic spacer by Outlaw Engineering, manifold only. The tb spacer had been cut to fit a 65mm tb so it will be sold with the bbtb. I also have the extended head studs that they offered as an option. I did not use them just wanted to have them incase. there is enough room on the stock studs, but just barely. will include with purchase either way. You will need 2 stock manifold gaskets with this spacer. i can include them for an extra $15. asking $20. Also in the picture is a set of smoked front markers for the rd2 front bumper.asking $10 for them.
RD carbon fiber door sills, with silver "RD" carbon weave inlay. Got in group by while back from Compact Divisions. will include new 3m tape for install. They have been on the car for several years, they do have minor scrapes that could be easily taken care of with a light grid sandpaper and polish. Don't remember what i paid for them but i'd say they're worth at least $50
Airram compatible strut bar. I know there are some ebay ones that people have gotten to fit but this was one of a hand full made, guaranteed to fit, by an older member viper996. powder coated black. I paid $90 i believe. asking $50
Next up are some body parts including, A modified oem front bumper with a gt tech lip kit that is 90% molded on to it, needs minor finishing work. let me know if your interested and we can come up with a price.
A set of gorilla widebody fenders, will fit rd1 and rd2. Drivers side still needs some work, passengers side is paint and put on. Nos4atu has first dibs on these. Hoping to get $200. don't really wanna say what i paid for them
Type R sideskirts. OEM sideskirts in korea. Tibbytib has first dibs. hoping for $75 for the pair
Just a list of stuff that i don't currently have pictures of, all of it is used.
-Sakio Mishi dual catch can $20
-Walbro 195 fuel pump $20
-aem intake (blue)$20, will need new filter
-35w 8000k HID set, literally just bought, after my first set gave in after 5years. $10
-Beta 2 valve and spark plug cover. $25
And if someone REALLY wants the Eibach pro kit springs i have (1.2 drop), ill take them out for $100. The impact side strut completely folded in half and i wasn't thinking when i organically listed it for sale.
ANY STOCK OR OEM PART THAT YOU NEED I ALSO HAVE, PLEASE LET ME KNOW.
