Fs: 2ea Megasquirt I V3.0 Kits
Thread Starter
Senior Member
Joined: Jul 2001
Posts: 7,063
Likes: 0
From: Clovis, NM
Vehicle: 2010 Jeep Wrangler Unlimited
We are going a different direction with the PNP Megasquirts. Because of that, I have two kits for sale and it could be your chance at saving some money.
Kit 1 : This one is about 90% complete. Almost everything is already soldered onto the board and it has been tested with the JimStim MS tester. The only things left to do are solder on the troubleshooting LED's, wire up the ignition and tap into your wiring harness. This is not ready to throw into a Tib and fire up, you will need to do some research. Buying this will save you about 10-14 hours of labor and if you do not have the soldering know-how you won't have to get a friend to do it. This also includes the 3 bar map sensor. This link is basically what you will get. http://www.glensgarage.com/catalog/megasqu...mbled-p-71.html. Asking $320 shipped in the US (You save about $40)
Kit 2: This one has not been opened. Includes a 3 bar map sensor. Asking $200 shipped in the US. (You save about $20)
The different direction we are going is not all that drastic. We will be using the 3.57 boards that have all the surface mount components. We plan on doing this so every unit we put out is exactly the same and if something were to go wrong troubleshooting would be a snap.
Kit 1 : This one is about 90% complete. Almost everything is already soldered onto the board and it has been tested with the JimStim MS tester. The only things left to do are solder on the troubleshooting LED's, wire up the ignition and tap into your wiring harness. This is not ready to throw into a Tib and fire up, you will need to do some research. Buying this will save you about 10-14 hours of labor and if you do not have the soldering know-how you won't have to get a friend to do it. This also includes the 3 bar map sensor. This link is basically what you will get. http://www.glensgarage.com/catalog/megasqu...mbled-p-71.html. Asking $320 shipped in the US (You save about $40)
Kit 2: This one has not been opened. Includes a 3 bar map sensor. Asking $200 shipped in the US. (You save about $20)
The different direction we are going is not all that drastic. We will be using the 3.57 boards that have all the surface mount components. We plan on doing this so every unit we put out is exactly the same and if something were to go wrong troubleshooting would be a snap.