Ok do you need the buttons too? And also, neither car had power mirrors so the triangles just had a hole for the little adjuster lever.

 

Thats cool about the triangles. Mine are not really messed up, one just has a scratch on it. You would never see it but I know its there :? . Nope dont really need the switches. I'm sure someone will want them to MOD.

 

Ok, so we've got a set of triangles, the door panels, and the curvy parts with handles. Right?

 

Lets drop the triangles. But the other stuff is a go as long as we are talking about the same thing smile.gif . Just to clarify what I need. If you take your door apart to replace the speakers. Everything that you need to take off. One screw holds on the little thingy behind the handle (need that), and multiple screws hold on the main pannel which then snaps off of the door itself. But I dont need the switches. Were we talking about the same thing? Sometimes it is hard to express things in words without pictures.

 

if you can spare any of these parts from one of the tibs..

:arrow: plastic black vent thing in the hatch on driver's side

:arrow: the circular vent in the driver's side door

:arrow: front passenger fog light

:arrow: how about the Tiburon logo on the back of one of them, mine's gone :-( then i'll try to find and FX badge later

:arrow: on the front side of your automatic shifter, i need that little faceplate, it's held on by 2 little screws, and then after you get those off there is one really little screw (this is what keeps the shifter from moving up/down), i need the plate, and all 3 screws.

:arrow: the switch box that controls the windows and the plate that goes over them, both passenger side (pic: www.geocities.com/zoned019/51_1.jpg that one is of driver's side though, but you get the idea)

:arrow: the little rubber hood spacer thing on driver's side under the hood and that bar that comes off the block and hooks around (pic: www.geocities.com/zoned019/51_2.jpg )

i also sent you this in pm, and don't I have dibs on the cai, i asked you about it before you even bought the blue car..because it was posted that the blue car had a cai and headers.

 

<div class='quotetop'>QUOTE </div><div class='quotemain'>head gasket, cam shaft journals, cam bearings , oil pick up tube screen, pressure relief valve, valve guides seals</div>

Please tell me that you are not serious. All of these parts should not be reused... ESP off of a car with 100k :

 

does the 1.8 tranny werk for a 99 2.0? if so how much for that?

 

I'll assume that the 99 is still a captive style rotor TC??? If it is no need to reply.

 

<div class='quotetop'>QUOTE (Tibbychick)</div><div class='quotemain'>And yes Patreezy I know you need the wheel hubs laugh.gif</div>

Actually I just need the wheel <u>hub</u> (driver side rear).
But I think I might have a change of plans...
I want to do a brake swap on my rear drums to disc. Does the black tib have disc brake assembly you are willing to sell? (rotors, hubs, calipers w/pads...i think that's everything you need correct me if I'm wrong)
If you can sell me your brake assembly (in good condition right?) then I don't want the wheel hub off the blue tib.

Also, do either of the tibs have the center console w/ the lid over the compartment? If so, I'd like that as well.

Thanks, TC...glad you won that silver tib! laugh.gif

 

center console if it has the little cubby hole WITH the lid.