Equal Length Headers!
#21
i need this header like three nights ago!! I got screwed on a ebay one. Doesnt come close to fitting. Do they have a phone number? I like to talk to people before i buy. Do they have these instock readyto go? How is there shipping? Do they get the part to you on time? I have heard many horror stories on here of people waiting on parts from certain places.I have cash in hand and the reviews seem good for this header.PLEASE HELP!!
Also i did send them an email early this morning but no response as of yet. I am so anxious to get this part and get it on.
Also i did send them an email early this morning but no response as of yet. I am so anxious to get this part and get it on.
#25
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
What was the fitting problem/
Bill is around his site all the time, he usually comes by here when he needs to or I mention it to him. I can call him if you want, his stuff goes out ASAP. The Megasquirts have been long delayed because of someone screwing us on building them, leading to a very lengthy re R&D of the items, but these are ready to ship.
Bill is around his site all the time, he usually comes by here when he needs to or I mention it to him. I can call him if you want, his stuff goes out ASAP. The Megasquirts have been long delayed because of someone screwing us on building them, leading to a very lengthy re R&D of the items, but these are ready to ship.
#26
I made it fit. I had to make the bolt holes way bigger as they didnt line up at all! No where near. And also had to grind on the top of the flange due to it hitting the oil pan cover that i also cut a small section from.
#27
Senior Member
Join Date: Apr 2008
Location: Western PA
Posts: 2,087
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Tiburon
Had the same issue with the exhaust manifold studs. top rightmost hole needed a file and the damn flanges are hollow! thumbsdown.gif
The turn down by the oil pan was very tight fit, i didn't have to grind it down but its less then 1/2 inch before it hits my oil pan.
The turn down by the oil pan was very tight fit, i didn't have to grind it down but its less then 1/2 inch before it hits my oil pan.
#28
http://www.hyundaiaftermarket.org/images/vendor1.png
Join Date: Sep 2008
Location: Brampton Ontario
Posts: 986
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Two 97 RD Tibs and 2010 Genesis Coupe
A friend of mine is looking for some performance headers for his 98 Tiburon and this looks pretty intresting.
I was reading somewhere that there MIGHT be an issue where one of the runners will touch the OEM FAN with this header installed?
Can anyone corfirm this before i buy it, OR has purchased this header and installed it without any issues
Thanks!
I was reading somewhere that there MIGHT be an issue where one of the runners will touch the OEM FAN with this header installed?
Can anyone corfirm this before i buy it, OR has purchased this header and installed it without any issues
Thanks!
#29
Senior Member
Join Date: Feb 2007
Location: London, Ontario
Posts: 898
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2011 Kawasaki ZX6R
I had these headers on my car at hyundai sunday. They don't touch the fan, I wasn't able to get my fan back in but my rad was pushed in a tad from an accident.
A regular tib will have no problem except 1 sensor has to be bend a little bit at the connector.
A regular tib will have no problem except 1 sensor has to be bend a little bit at the connector.
#30
Administrator
Join Date: Oct 2002
Location: ɯooɹpǝq ɹnoʎ
Posts: 13,943
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: ǝdnoɔ sısǝuǝƃ
I think the first person installing the headers had a problem with the fans touching, but it was discovered that they had done something wrong.
I'm pretty sure that's how it went.
I'm pretty sure that's how it went.