Introduction Welcome To Hyundai Aftermarket! We are the worlds #1 most active and Premier Hyundai Forum and Website for Tiburon, Genesis, Veloster, Accent, Elantra, Santa Fe, Tucson, Equus, and Sonata owners! Post in here under the thread that was automatically created for you, and tell us a little about yourself!

New to the group

Old Jul 10, 2008 | 03:20 PM
  #1  
NP45's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 5
Likes: 0
From: Summerville SC
Vehicle: 07/Hyundai/Santa Fe&Azera
Default New to the group

Hey all,
was surfing the web for after market parts and ran across u guys. So far interesting stuff here. Anyway I own an 07 Santa Fe Ltd and Azera GLS. I have made a couple of low cost mods to the Santa Fe by replacing the stock muffler with a Flow master 40 series and replaced the stock air filter and box with a cold air system. Got rid of the stock 18 inch wheels and tires which were crap (Bridgestone Dueler HT 60's) the new shoes r Perelli PZERO Nero MS 235/55/17 (these were on the Azera) wife complained that they bounced to much for her which they did. But on the Santa Fe what a difference over the Duelers as far as handling plus I didn't loose any ride quality so it was a win for me. I was a little leery going down in size since it would throw of the speedo by 4 mph faster. Can this be adjusted to read correctly? Interested in installing lowering springs, anyone have recommendation on this also looking at ways to improve performance/fuel economy without dropping a lot of cash into it. Look fwd to hearing for the Pro's on this.

Lawrence
Reply
Old Jul 10, 2008 | 03:49 PM
  #2  
187sks's Avatar
Administrator
 
Joined: Mar 2006
Posts: 12,515
Likes: 2
From: Lacey, WA
Vehicle: Two Accents, Mini, Miata, Van, Outback, and a ZX-6
Default

First of all
welcome.gif

As far as the lowering goes, what are your goals? Looking nice and low, handling improvement, both? Also what level of stiffness are you willing to live with?

For handling you can get front and rear sway bars from Whiteline.

You may be able to get Eibach springs through SFX Performance but you'll have to contact them because they say they're unavailable right now.

I don't think your speedo can be adjusted to read correctly without using a device to modify your VSS output signal which is more trouble than it's worth IMO. You can install a GPS speedo however if it's a major concern to you.

The CAI and exhaust are a good start for both performance and fuel economy. Is your Santa Fe the 3.8l V6? You could get some headers to further improve your power and fuel economy but it'll require a couple of high flow cats also. If it's possible I would love to hear a video of the Santa Fe with the 40 Series on it. I've had the 40 Series on several vehicles and always loved the sound.

Good luck and if you need anything else ask away!
Reply
Old Jul 10, 2008 | 10:01 PM
  #3  
bdiggy's Avatar
Moderator
 
Joined: Dec 2007
Posts: 2,448
Likes: 0
From: Thomaston, CT
Vehicle: 2012 Veloster DCT w/ Tech
Default

Welcome to the forum cool.gif
Reply
Old Jul 11, 2008 | 04:39 AM
  #4  
jsharptooth91's Avatar
Senior Member
 
Joined: May 2008
Posts: 607
Likes: 0
From: Vancouver, WA
Vehicle: 2002 Accent 2.0L
Default

Welcome. I think 187 covered it all. You have any pix of your ride?
Reply
Old Jul 11, 2008 | 07:13 AM
  #5  
Visionz's Avatar
Administrator
 
Joined: May 2001
Posts: 23,226
Likes: 9
From: Upstate NY
Vehicle: 2010 Genesis 2.0T
Default

welcome.gif to the site! I'm an old skool minitrucker so it it were up to me, I would take the Santa Fe, throw some air suspension on it, slam it to the ground with 24's, shave the door handles and all moldings/emblems, custom interior with a huge sound system, and paint it with a nice Kandy color...then call it a day! laugh.gif

Good luck though with your project! smile.gif
Reply
Old Jul 11, 2008 | 08:31 AM
  #6  
NP45's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 5
Likes: 0
From: Summerville SC
Vehicle: 07/Hyundai/Santa Fe&Azera
Default

Thanks...lol
my 11yro son would love that but I think my wife would kill me...gonna get there though...I want it to be a wolf in sheeps clothing... laugh.gif

<div class='quotetop'>QUOTE(Visionz @ Jul 11 2008, 09:13 AM) </div><div class='quotemain'>welcome.gif to the site! I'm an old skool minitrucker so it it were up to me, I would take the Santa Fe, throw some air suspension on it, slam it to the ground with 24's, shave the door handles and all moldings/emblems, custom interior with a huge sound system, and paint it with a nice Kandy color...then call it a day! laugh.gif

Good luck though with your project! smile.gif</div>
Reply
Old Jul 11, 2008 | 08:34 AM
  #7  
NP45's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2008
Posts: 5
Likes: 0
From: Summerville SC
Vehicle: 07/Hyundai/Santa Fe&Azera
Default

Thanks
Reply
Old Jul 11, 2008 | 12:01 PM
  #8  
Visionz's Avatar
Administrator
 
Joined: May 2001
Posts: 23,226
Likes: 9
From: Upstate NY
Vehicle: 2010 Genesis 2.0T
Default

This should help out with ideas:

http://www.cardomain.com/MakeModel/Hyundai/Santa%20Fe
Reply
Old Jul 11, 2008 | 12:09 PM
  #9  
Visionz's Avatar
Administrator
 
Joined: May 2001
Posts: 23,226
Likes: 9
From: Upstate NY
Vehicle: 2010 Genesis 2.0T
Default





Reply
Old Jul 12, 2008 | 12:21 AM
  #10  
filletme's Avatar
Member
 
Joined: Jul 2008
Posts: 33
Likes: 0
From: austin tx
Vehicle: 08 sonata
Default

not diggin tha orange!

and welcome np45
Reply


All times are GMT -6. The time now is 08:43 AM.