Hittin' Switches.....
Thread Starter
Senior Member
Joined: Aug 2003
Posts: 2,436
Likes: 0
From: Rockville, MD
Re: CUDA body kit
This is phase one of my led and halo install.
Phase two probably wont come for another couple of weeks as i gather everything needed.
Thats a peice of REAL CF fixed w/ double sided 3M tape to a peice of black laminated partical board.
This pic didnt turn out so good, must have been the high pressure sodium lamps in our cabinet shop that messed it up.
this pic show the CF very well, if you look on the far right you'll see my next little project sitting on the floor....a GK foot rest.
Phase two probably wont come for another couple of weeks as i gather everything needed.
Thats a peice of REAL CF fixed w/ double sided 3M tape to a peice of black laminated partical board.
This pic didnt turn out so good, must have been the high pressure sodium lamps in our cabinet shop that messed it up.
this pic show the CF very well, if you look on the far right you'll see my next little project sitting on the floor....a GK foot rest.
Senior Member
Joined: Oct 2003
Posts: 3,832
Likes: 0
From: Fort Erie, Ontario
Vehicle: 2004 Acura TL
Re: Stainless Steel Brake Lines GB #3 *PAY UP!!!*
So each one of those will be connected to a light of some sort. 8O
That's a lot of wiring!! Looks good though I like how you can't really see the C/F it's kinda sunken. laugh.gif
That's a lot of wiring!! Looks good though I like how you can't really see the C/F it's kinda sunken. laugh.gif
Thread Starter
Senior Member
Joined: Aug 2003
Posts: 2,436
Likes: 0
From: Rockville, MD
Re: Tibby01's LED Stuff
Thanks everyone....
Yes, all of them will be hooked up some some sort of light source.
Heres What I have going in :
Dual Color Haloz from Blacktibs.....Each color will be wired seperately, which will actually give me three different colors. Amber and White. so I will end up w a sort of yellowish color when both are on.
so that 2 switches.
Lunar Accents (yellow)
3 switches total....
Interior (door and Dash, RED) haloz, again from blacktibs.
4.....
Speaker Haloz - Red, from ...... Guess who???
5.....
Speaker Grille LED mod. There a DIY on here about it but i forgot the guys name. (just to give proper credit i will look it up in a few.) :
Mr_Hyde_NT : LEDs and Speakers
6.....
and I haven't really decided what im going to do w/ the other switch.....Either something for my hatch.....or the under door lights like blacktibs did.
The CF is sunken becuase I did this the easiest way possible.....using the stock cup holder mounting points......Once I decide where my master power switch is going, I will prob stick some more Leds in the gap to highlight the CF.
Yep, got em from carddomain....pilot billet switches w/ red LEDs.
If you ever see a car coming up behind you w/ all yellow and orange lights.....Get the F**k outta my way!!!!!! ;-)
QUOTE (silvertibbs)
So each one of those will be connected to a light of some sort.
That's a lot of wiring!! Looks good though I like how you can't really see the C/F it's kinda sunken.
That's a lot of wiring!! Looks good though I like how you can't really see the C/F it's kinda sunken.
Yes, all of them will be hooked up some some sort of light source.
Heres What I have going in :
Dual Color Haloz from Blacktibs.....Each color will be wired seperately, which will actually give me three different colors. Amber and White. so I will end up w a sort of yellowish color when both are on.
so that 2 switches.
Lunar Accents (yellow)
3 switches total....
Interior (door and Dash, RED) haloz, again from blacktibs.
4.....
Speaker Haloz - Red, from ...... Guess who???
5.....
Speaker Grille LED mod. There a DIY on here about it but i forgot the guys name. (just to give proper credit i will look it up in a few.) :
Mr_Hyde_NT : LEDs and Speakers
6.....
and I haven't really decided what im going to do w/ the other switch.....Either something for my hatch.....or the under door lights like blacktibs did.
The CF is sunken becuase I did this the easiest way possible.....using the stock cup holder mounting points......Once I decide where my master power switch is going, I will prob stick some more Leds in the gap to highlight the CF.
QUOTE (Mad-Machine)
looking good.. those illuminated switches too?
Yep, got em from carddomain....pilot billet switches w/ red LEDs.
QUOTE (UltraTibby)
You have that many things that need to light up?????? Damn we will be able to see you from space
.......Well lets see....2nd Gen tibs come w/ a mininum of 8 lights in front (mine didnt come w/ stock fogs)......thats alot of light already....now include my CATZ XLDs.....theres ten....If you want to count the lunar accents, 12, the haloz on w/ the lunar accents, 14!!!!!!!!!!If you ever see a car coming up behind you w/ all yellow and orange lights.....Get the F**k outta my way!!!!!! ;-)