Door Lights-What d'ya think?
You could always use glue or epoxy wink.gif
Hmmm, I'll have to experiment,... there is a white "houseing" for the OEM bulb to mount to, so I wonder if you can take that off,(requires taking the door off) then mount the blue lens onto that thing somehow,...
You might wanna take the door off, it's pretty simple, seems like I've done it like a million time. tongue.gif Maybe mount the plastic around the inside of the white houseing? I dunno,...
Anyway will try to think of someway to mount it. BTW, you should do this mod too: http://www.fxtreme.org/forums/cgi-bin/ulti...ic&f=3&t=000741
Did it a few weeks ago, and it looks WICKED!! It's so friggin bright!, and it's simple to do, just get your LEDs and if you know how to solder, you're set!
This will match the blue door lights too!

Oh Cringe, yeah the handle is like that normally smile.gif
[ November 26, 2001: Message edited by: KayJai ]
Hmmm, I'll have to experiment,... there is a white "houseing" for the OEM bulb to mount to, so I wonder if you can take that off,(requires taking the door off) then mount the blue lens onto that thing somehow,...
You might wanna take the door off, it's pretty simple, seems like I've done it like a million time. tongue.gif Maybe mount the plastic around the inside of the white houseing? I dunno,...

Anyway will try to think of someway to mount it. BTW, you should do this mod too: http://www.fxtreme.org/forums/cgi-bin/ulti...ic&f=3&t=000741
Did it a few weeks ago, and it looks WICKED!! It's so friggin bright!, and it's simple to do, just get your LEDs and if you know how to solder, you're set!
This will match the blue door lights too!

Oh Cringe, yeah the handle is like that normally smile.gif
[ November 26, 2001: Message edited by: KayJai ]
KayJai - That housing comes out of the door, you don't have to take the door off. smile.gif Unless ours are different, you just have to kind of push down on the housing (with the lens off) and the top part will pop out and you can pull it out. Or, simple use something to wedge it out and it will come out. Nod.. I've been thinking about that window switch lights that would look pretty nifty. Thanks again for all the props.
Also, thanks to everyone who suggested ways to mount these. However, I was hoping to avoid the whole glueing thing.. I think I'm going to experiment with heating the piece and molding it to the housing.. I kinda like my idea about the two chrome bolts too.. the chrome goes w/ my interior (Silver and Blue)
Thanks again
Also, thanks to everyone who suggested ways to mount these. However, I was hoping to avoid the whole glueing thing.. I think I'm going to experiment with heating the piece and molding it to the housing.. I kinda like my idea about the two chrome bolts too.. the chrome goes w/ my interior (Silver and Blue)
Thanks again
As per Zorro, yeah they are,...
I didn't get a chance to look at the AC / Air Recirc buttons, cuz Zorro was saying she couldn't change the fog light button, so I didn't want different colors above the stereo.
I didn't get a chance to look at the AC / Air Recirc buttons, cuz Zorro was saying she couldn't change the fog light button, so I didn't want different colors above the stereo.



