My V on the dyno
#1
Junior Member
Thread Starter
Join Date: Feb 2012
Location: Portland, OR
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2012 / Veloster
My V on the dyno
This is my base Veloster on the dyno at PRE Racing. I wanted to get a base line before adding an exhaust to be able to compare the changes. Stock except for the Nameless Performance prototype CAI.
http://youtu.be/Ze5LFahRqSs
EDIT----- Added dyno sheet images--------------
http://youtu.be/Ze5LFahRqSs
EDIT----- Added dyno sheet images--------------
#3
Junior Member
Thread Starter
Join Date: Feb 2012
Location: Portland, OR
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2012 / Veloster
Yeah that is what they got. 130.2HP/130ft-lbs torque average over 4 pulls. I'll try and get the sheets up later. I wish I had a bone stock pull on their dyno to compare but I do not.
That seems be in the ball park with other intake dynos I've seen on the V with this one being a little higher in HP and torque especially. It is sorta hard to compare though, different cars, dynos etc. The tech did say it was really rich on top, no way to adjust that yet though. The intake did help a lot with low end response and has a great tone when your standing on it.
That seems be in the ball park with other intake dynos I've seen on the V with this one being a little higher in HP and torque especially. It is sorta hard to compare though, different cars, dynos etc. The tech did say it was really rich on top, no way to adjust that yet though. The intake did help a lot with low end response and has a great tone when your standing on it.