Window Fell Through Door
I recently had this happen to me when I was out driving the other day, went to roll down the window and it just dropped through. I looked at the cables and they are all destroyed and frayed. I contacted the local hyundai dealership and they said they could do it for $329.00 + $41.00 for them to look at it and determine if indeed it is the window regulator.
You guys have to look into U-pull-it junkyards... There starting to throw 97-98 tibs in there (atleist here anyway, there are 2 in the yard I go to alot). This is the price right off their list:
Window Regulator (with motor) Cost: $15.90 Core:$2.00
Window Regulator(without motor) Cost: $7.40
Not that you shouldnt spend your money, but why spend $135 when you can pull it out of the car (Hey, you can find out how to put it IN this way, without breaking YOUR tib) for $8.
Window Regulator (with motor) Cost: $15.90 Core:$2.00
Window Regulator(without motor) Cost: $7.40
Not that you shouldnt spend your money, but why spend $135 when you can pull it out of the car (Hey, you can find out how to put it IN this way, without breaking YOUR tib) for $8.
You have to have a couple in your area. Check them like once every month or two. They cycle their cars on a schedule. I checked 4 different ones before I found one that has a good selection of imports.
Yeah, it's your cable... same thing happened to me. It rusted out from water getting in there and snapped. The crappy thing is, the motor in your regulator is probably fine... but you can't buy just the cable, they are attached as one piece. Doh.
Keep checking the junkyards, thats where I got mine.
Tom
Keep checking the junkyards, thats where I got mine.
Tom
Senior Member
Joined: Dec 2007
Posts: 1,565
Likes: 0
From: port huron mi
Vehicle: 2000 hyundai tiburon
to prevent it happening again you might want to replace the seals on your window and doors. i used to see it alot when i worked in my shop before i came into the military. usually it didn't occur once we did that, you also want to find some weather proofing for you cables, sorry didnt mean to double post hit send beforre i was done



