Hey guys, its been a while since i posted here.

I need engine measurements, all measurements you can think of.

I bought an engine simulation program and I am trying to build a stock 2.0 as a baseline.

So I need stuff like: valve diameters and flow rates at various lifts, combustion chamber volume, head gasket thickness, piston deck height,
camshaft lift and duration, flow rate of the throttle body, and any other measurement you can think of

Thank you



c'mon guys!

I find it hard to believe that all you guys (and gals) who have built up engines have never

torn one down and measure these kind of things. I would do it myself, but the only engine I have

is currently under the hood of my tib haulin my ass back and forth to work.