Hello all. Interested in locating one piece non adjustable strut tower brace for 2007 Sonata SE 3.3 V6. I've been trying to locate a used OEM strut tower brace from the 2009 Hyundai Genesis coupe (2.0T or 3.8 liter) for test fit. I also contacted DC Sports and inquired if they might manufacture a strut tower brace for the 06 - 10 sonata 3.3 V6 (they manufactured the OEM strut tower brace for the 08 Hyundai Accent SE. Awaiting a reply.

I've also conatcted Mike (mike@roadraceengineering.com) at Road Race Engineering (562-777-1522) about producing a strut tower brace for 06 - 2010 Sonata 3.3 V6 (this is a Mitsubishi performace shop who manufactured a quality one piece strut tower brace for 99 - 03 Mitsubishi Galant). Mike was interested however, needed a test vehicle to do so. Unfortunately I'm not located in CA, so if there's a member interested and located in the following CA area (13022 La Dana Ct. Santa Fe Springs, Ca. 90670) contact Mike!

All comments and replies appreciated, thank you.

 

I'M In Socal but have a 2.4. Santa Fe Springs is in my neighborhood and I think the only difference is the 6 cyl head is a little bigger as well as the plastic cover. He should make one for the rear as well. Ask him if it will work.

 

Try kfxperformance.com they have alot of Hyundai parts