Excel
#43
Senior Member
Join Date: Feb 2010
Location: Kent, Wa
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 13 Gen Coupe Ult.
Hey man just eanna say keepi it cooking, and i do have a few afteramrket morotor mounts i will send you, if you wanna pay for, there poly mountys for a 6 bolt. would have to smach out the stock bushing and extc.. but same size... anyway hit me up!!! PM ME
^^^ I was going to EDIT this, but I like it, If you cant read this post, you havent drank enough! Sorry guys, I got to start turning my computer off when i drink!
^^^ I was going to EDIT this, but I like it, If you cant read this post, you havent drank enough! Sorry guys, I got to start turning my computer off when i drink!
#44
Senior Member
Join Date: Feb 2010
Location: Kent, Wa
Posts: 1,468
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 13 Gen Coupe Ult.
Heyalso wanted to say, you should totally not hang the FPR off the Fuel rail, I have seen it, and over time with all the vibrations, and shifting, the wieght of the FPR, WILL cause the Rail to crack. I would mount it to the firewall and run a line to the rail from the regulator! Just a little note from XP.
Yet, good job, also paint the turbo elbow, lol!!!
Yet, good job, also paint the turbo elbow, lol!!!
#45
Senior Member
Thread Starter
Join Date: Aug 2010
Location: MA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1994 Hyundai Excel Coupe
Heyalso wanted to say, you should totally not hang the FPR off the Fuel rail, I have seen it, and over time with all the vibrations, and shifting, the wieght of the FPR, WILL cause the Rail to crack. I would mount it to the firewall and run a line to the rail from the regulator! Just a little note from XP.
Yet, good job, also paint the turbo elbow, lol!!!
Yet, good job, also paint the turbo elbow, lol!!!
Thanks man, ur not the 1st to tell me! Looking for some braided wire to mount it to the rear of the firewall, figured it'd look nice for the picture. I'll paint the elbow lol, need to do the same w/ my ic piping n stuff
#47
Senior Member
Thread Starter
Join Date: Aug 2010
Location: MA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1994 Hyundai Excel Coupe
Engine is IN!!! Took a little work but had my buddy Tom drive down n help get the wiring harness in n stuff. Very pleased so far can't wait to actuall crank this thing. There were somethings we had to do (minor) to get this thing in I'll describe them soon, here are some pix in the mean time!
#49
Senior Member
Thread Starter
Join Date: Aug 2010
Location: MA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1994 Hyundai Excel Coupe