replacing lifters
Thread Starter
Member
Joined: Jan 2003
Posts: 94
Likes: 0
From: Cedar Rapids
Vehicle: 2001 Elantra GLS
replacing lifters
anyone ever replace their own lifters on a beta 1 and if so did u put the stock hydraulic lifters or put roller lifters becuz im replacing mine and would like to put the rollers in but dont know what i have to do. thanks
Senior Member
Joined: Jun 2012
Posts: 345
Likes: 3
From: NC
Vehicle: 2000 Hyundai Elantra GLS
I have a diy on taking apart and cleaning the lifters. It quieted them down a lot.
Replacement lifters cost about $200 iirc. Or you could just swap to a Beta 2 non-cvvt head that already has solid lifters.
Replacement lifters cost about $200 iirc. Or you could just swap to a Beta 2 non-cvvt head that already has solid lifters.
Super Moderator
Joined: Sep 2001
Posts: 10,795
Likes: 5
From: Pflugerville, TX
Vehicle: 2000 Elantra
It's hydraulic (low maintenance, works ok enough for normal engines) or solid (requires clearance setting, can be spun faster). Both involve sliding contact with the cam. There is no conversion to roller anything in this valvetrain.