REmoving flywheel from accent tranny
Thread Starter
Senior Member
Joined: Apr 2008
Posts: 780
Likes: 0
From: San Diego, Ca
Vehicle: 2004 Hyundai Accent 1.6T
REmoving flywheel from accent tranny
Hey guys I just need to know the tool and what size is needed to remove the bolts from the flywheel of an Accent tranny. I assume its the same for all years?
Senior Member
Joined: May 2008
Posts: 607
Likes: 0
From: Vancouver, WA
Vehicle: 2002 Accent 2.0L
It should be a 17mm socket, you will need an impact wrench. They should be on their with 100 ft lbs of tq, or somewhere in the ballpark. If you need help removing it give me a shout, done it a couple of times.
