turn signals/hazards no workie.
Administrator
Joined: Mar 2006
Posts: 12,515
Likes: 2
From: Lacey, WA
Vehicle: Two Accents, Mini, Miata, Van, Outback, and a ZX-6
You should be able to supply voltage to the output from the flasher unit and light the bulb unless there's a wiring issue or it's routed through the multifunction switch like on a GM.
Thread Starter
Member
Joined: Jul 2008
Posts: 73
Likes: 0
From: oceanside, ca
Vehicle: 2002 hyundai accent
QUOTE(187sks @ Sep 29 2008, 09:26 PM)
You should be able to supply voltage to the output from the flasher unit and light the bulb unless there's a wiring issue or it's routed through the multifunction switch like on a GM.
equally as frustrating.... out of shear curiosity i plugged my factory flasher unit in... the signals worked!!! the hazards still don't work and stop the signals from working when engaged, but I don't care. the new one i got was the same voltage, some other specs must have been out of tolerance... Must have did something right after i got the new flasher.
oh well, i am so glad this adventure is over, for now. Some day i will pursue the hazard issue. I am off to get some dominoes chicken kickers and a six pack of corona partytime.gif ...
