Here are some pictures. Keep in mind these pictures were taken with the fittings hand tightened in. Also, these ones have not engravings. These are just RANDOM combinations of fittings.












This thread is ONLY for placing orders. Information/questions please go to this thread : http://www.rdtiburon.com/index.php?showtopic=19605. ALL POSTS THAT ARE NOT FOR PLACING ORDERS WILL BE DELETED.


Orders start off from the BASIC kit, which is:
1 vacuum manifold
1 1/4 barb fittings
1 adapter
1 plug
all 4 ports are empty.

You can add fittings/hoses/engraving for the following. Add each price on the price of the basic kit.

1 1/4" barb fitting 1$

1 1/8" ID pneumatic air fittings. (2 port-3.50$, 4 port-$6.50) All sorts of styles available, depending on application

1/8" high compression pneumatic polyethylene line.(MUST BE USED FOR PNEUMATIC FITTINGS) BLACK, RED, BLUE, or YELLOW Comes in 25ft sections. Add $5 (For each color except for black we will need at least 2 people for)

1/4" pressure line. Comes in 15 ft sections. Add $5

Engravings- Basically anything you want. ex. Turbulence $10

1/4" plugs $1

GB PRICE IS AS FOLLOWS:
Under 8 people Basic kit is $22+shipping
Between 9-15 Basic kis is $19 +shipping
Over 15 Basic kit is $16 +Shipping

Orders will be shipped out after the holidays.
Payment due by Jan 3
DO NOT PLACE AN ORDER THAN BACK OUT OR YOU WILL BE SUSPENDED FROM FOR SALE FORUMS.

Orders should be as following:
tanc-basic kit+3 plugs + 1(2 port pneumatic) + 1(90degree pneumatic) + 2 1/4 barb fittings + 25ft blue 1/8 line, 15ft pressure line

I accept paypal and money orders. For money orders, shipment will be shipped once check is cleared. Paypal please ADD 3% PAYPAL fees.

I will have my paypal address up in the upcoming days.

===========================

1.Aust_RD
2.mwood
3.
4.
5.
6.
7.
8.
9.
10.

 

I'm in.

I would like the Basic kit with;

2 X 2 Port Pnuematic fittings

1 X 1 1/8" Hose

2 X 1/4" Barb fittings



Will you be shipping to Australia?

 

Yes I will.

 

put me down...will send money later this afternoon

also if i get the basic kit now, is it alright if i order some different fittings later depending on my turbo set up?

^^^

have to wait until your paypal addy is on the forum...


*MODS*

can you put this in my post above with an edit...thank you in advance

 

For your boost guage/fpr/bov you'll need 1/8th line smile.gif

I would use the Pnuematic fittings.

I'll get back to you guys with the Paypal address.

 

^^^

thanks for the heads up...just let us know about the paypal addy

 

BUMP smile.gif

Due to the holidays, I will not be able to make any until afterwards.

So sign up because they wont come again

 

i want my order to consist of basic kit with...

1x 1/8" high compression pneumatic polyethylene line(red)

2x port 1/8" ID pneumatic air fittings.

1 1/4" barb fitting