I just got my shark spoiler today.

Removed the under panel of the hatch, Removed the 4 nuts that were holding it on.

Still wont come off, anythin i am missing?

Maybe i have to pry it off a bit or something.

Does an OEM shark wing, fit the oem holes? or will i have to make new holes and cover the old ones?

 

Umm, brake light wiring harness?
Plus, isn't there 6 nuts?

 

Disconnected Wiring.

I only seen 4 nuts on my oem.

1 side, 2 middle, 1 side....

Are the other too hidden somewhere?

 

no sure, but on my rd2 spoiler there are 2 for each side. one is right in the open, and the other one you have to get an extension for as it is hidden in a sheet metal "pocket"

 

try prying the metal out a bit (just cut the metal at the hole and grab with pliers and bend)...to find those other nuts...that's what I had to do (me=RD1). =)

 

yea, it wouldn't make too much sense to have a such a large area kept on with only 1 nut... there's gotta be 2 on each sides as well