CLEAR TAIL LIGHT PETITION
a while back, someone posted a rpely saying that he knew a place in pa. that was making these taillights...does anyone know anything about this...he lefta phone number but it was always busy when i called....sounds fishy!
This is an old issue. I think I remember hear about it on Hyundia Tuner (which I miss sad.gif ). Some guy in Aussie's making them. He's wanting like 450 (Aussie $$) which is about $250-200 US$.
But as far as I know you'll be getting pulled over everywhere. Cops are ****s & like pulling Tuner's over to ruin our day!
Anyhow...my 2 cents.
But as far as I know you'll be getting pulled over everywhere. Cops are ****s & like pulling Tuner's over to ruin our day!
Anyhow...my 2 cents.
Senior Member

Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Nope.
All clears are legal if you add some reflective material like we've talked about before. Here it is, you have to have a AMBER piece of reflective material seen from the side mounted IN FRONT of the front edge of the front door on both sides. 1 Inch by 3 Inches. On the back, somewhere visible from the side, same measurments, mounted behind the rear most edge of the rear door, RED reflective material. If you just stick some Clears in your car, yes, illegal, unless you have what I mentioned.
Ways around? Well, get some sort of reflector and clip it onto the door edge. Take it off for show or whatever. Magnets. Something.
All clears are legal if you add some reflective material like we've talked about before. Here it is, you have to have a AMBER piece of reflective material seen from the side mounted IN FRONT of the front edge of the front door on both sides. 1 Inch by 3 Inches. On the back, somewhere visible from the side, same measurments, mounted behind the rear most edge of the rear door, RED reflective material. If you just stick some Clears in your car, yes, illegal, unless you have what I mentioned.
Ways around? Well, get some sort of reflector and clip it onto the door edge. Take it off for show or whatever. Magnets. Something.


