OZ-BBTB
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Re: Torque converter issues...
Looks good so far.
Wish you'd do a 70 for the rest of us that prolly can't get it elsewhere.
You'll be wanting one later anyways.
Wish you'd do a 70 for the rest of us that prolly can't get it elsewhere.
You'll be wanting one later anyways.
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 1,487
Likes: 0
From: Adelaide, OZ
Vehicle: Hyosung GT650
Re: what are the dyno's readings on stock RDs
the proto-type in the pics is 60mm, but it is only going to be used for the trial fit as there's a few things that I'm not happy with on it so... 02.gif
When I remake it I'm going with 62mm 8)
tibby01 there's about 8hrs of machining to that stage, then I still have to do the butterfly & shaft. The programs (yes more than 1) took about another 8 hrs so far, but they're not finished yet.
I was hoping to have it finished to trial stage by now, but I've been off work sick for most of this week, so next week I hope wink.gif
REDZ I don't plan on going turbo, so I won't be needing a 70mm TB. Good try though. :roll:
When I remake it I'm going with 62mm 8)
tibby01 there's about 8hrs of machining to that stage, then I still have to do the butterfly & shaft. The programs (yes more than 1) took about another 8 hrs so far, but they're not finished yet.
I was hoping to have it finished to trial stage by now, but I've been off work sick for most of this week, so next week I hope wink.gif
REDZ I don't plan on going turbo, so I won't be needing a 70mm TB. Good try though. :roll:
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Re: OZ-BBTB
I know I'm beating a dead horse man, but how hard would it be to do that small run of 70MM ones for those of us that REALLY want one later?
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 1,487
Likes: 0
From: Adelaide, OZ
Vehicle: Hyosung GT650
Re: H-town car meet (saturday's)
QUOTE (REDZMAN)
I know I'm beating a dead horse man, but how hard would it be to do that small run of 70MM ones for those of us that REALLY want one later?
Redz, it's not just a matter of making 1 with a bigger bore. The whole out side would be changed also. The front of mine where the intake joins on is only 72mm just for starters 02.gif
Maybe 1 day, but not at the moment mang.
Senior Member
Joined: Sep 2006
Posts: 2,357
Likes: 0
Vehicle: 1997 Hyundai Fx Coupe
Just Some Custom Interior
... So how's my BBTB coming along? wink.gif
It'll make a nice little X-mas pressie to myself!
Actually, while you're at it Col...
"Dear Santa (AKA: col96fx),
For X-mas, can I please have a custom 62mm BBTB, a nice polished centre bar & rear strut-bar, a polished stainless steel intake pipe just like yours, a custom polished stainless steel spark-plug cover, some custom mandrel bent stainless steel exhaust piping to go with the new polished stainless steel 4-1 tuned length header you can make me when you get a spare minute, etc..."
lol.gif lol.gif lol.gif wink.gif
It'll make a nice little X-mas pressie to myself!
Actually, while you're at it Col...
"Dear Santa (AKA: col96fx),
For X-mas, can I please have a custom 62mm BBTB, a nice polished centre bar & rear strut-bar, a polished stainless steel intake pipe just like yours, a custom polished stainless steel spark-plug cover, some custom mandrel bent stainless steel exhaust piping to go with the new polished stainless steel 4-1 tuned length header you can make me when you get a spare minute, etc..."
lol.gif lol.gif lol.gif wink.gif
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 1,487
Likes: 0
From: Adelaide, OZ
Vehicle: Hyosung GT650
Re: QUICK QUESTION-Please answer fast
Hey Oz, the BBTB hasn't gone far this week (works been to busy, BUGGER) 02.gif
I am planning to make some headers 1 day, but 1st a front strut bar 8)
BTW Santa's bringing me a nice new Steering wheel this year, b/c I've been a good boy wink.gif :twisted:
I am planning to make some headers 1 day, but 1st a front strut bar 8)
BTW Santa's bringing me a nice new Steering wheel this year, b/c I've been a good boy wink.gif :twisted:
Senior Member
Joined: Sep 2006
Posts: 2,357
Likes: 0
Vehicle: 1997 Hyundai Fx Coupe
Re: Employment
QUOTE (col96fx)
BTW Santa's bringing me a nice new Steering wheel this year, b/c I've been a good boy wink.gif :twisted:
What style of steerer you goin' for?
I'm gonna get this one... maybe...
Nice & chunky!! 8)
