OZ-BBTB
#42
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Re: Torque converter issues...
Looks good so far.
Wish you'd do a 70 for the rest of us that prolly can't get it elsewhere.
You'll be wanting one later anyways.
Wish you'd do a 70 for the rest of us that prolly can't get it elsewhere.
You'll be wanting one later anyways.
#44
Senior Member
Thread Starter
Join Date: Jul 2004
Location: Adelaide, OZ
Posts: 1,487
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Hyosung GT650
Re: what are the dyno's readings on stock RDs
the proto-type in the pics is 60mm, but it is only going to be used for the trial fit as there's a few things that I'm not happy with on it so... 02.gif
When I remake it I'm going with 62mm 8)
tibby01 there's about 8hrs of machining to that stage, then I still have to do the butterfly & shaft. The programs (yes more than 1) took about another 8 hrs so far, but they're not finished yet.
I was hoping to have it finished to trial stage by now, but I've been off work sick for most of this week, so next week I hope wink.gif
REDZ I don't plan on going turbo, so I won't be needing a 70mm TB. Good try though. :roll:
When I remake it I'm going with 62mm 8)
tibby01 there's about 8hrs of machining to that stage, then I still have to do the butterfly & shaft. The programs (yes more than 1) took about another 8 hrs so far, but they're not finished yet.
I was hoping to have it finished to trial stage by now, but I've been off work sick for most of this week, so next week I hope wink.gif
REDZ I don't plan on going turbo, so I won't be needing a 70mm TB. Good try though. :roll:
#45
Senior Member
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Re: OZ-BBTB
I know I'm beating a dead horse man, but how hard would it be to do that small run of 70MM ones for those of us that REALLY want one later?
#46
Senior Member
Thread Starter
Join Date: Jul 2004
Location: Adelaide, OZ
Posts: 1,487
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Hyosung GT650
Re: H-town car meet (saturday's)
QUOTE (REDZMAN)
I know I'm beating a dead horse man, but how hard would it be to do that small run of 70MM ones for those of us that REALLY want one later?
Redz, it's not just a matter of making 1 with a bigger bore. The whole out side would be changed also. The front of mine where the intake joins on is only 72mm just for starters 02.gif
Maybe 1 day, but not at the moment mang.
#47
Senior Member
Join Date: Sep 2006
Posts: 2,357
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Hyundai Fx Coupe
Just Some Custom Interior
... So how's my BBTB coming along? wink.gif
It'll make a nice little X-mas pressie to myself!
Actually, while you're at it Col...
"Dear Santa (AKA: col96fx),
For X-mas, can I please have a custom 62mm BBTB, a nice polished centre bar & rear strut-bar, a polished stainless steel intake pipe just like yours, a custom polished stainless steel spark-plug cover, some custom mandrel bent stainless steel exhaust piping to go with the new polished stainless steel 4-1 tuned length header you can make me when you get a spare minute, etc..."
lol.gif lol.gif lol.gif wink.gif
It'll make a nice little X-mas pressie to myself!
Actually, while you're at it Col...
"Dear Santa (AKA: col96fx),
For X-mas, can I please have a custom 62mm BBTB, a nice polished centre bar & rear strut-bar, a polished stainless steel intake pipe just like yours, a custom polished stainless steel spark-plug cover, some custom mandrel bent stainless steel exhaust piping to go with the new polished stainless steel 4-1 tuned length header you can make me when you get a spare minute, etc..."
lol.gif lol.gif lol.gif wink.gif
#48
Senior Member
Thread Starter
Join Date: Jul 2004
Location: Adelaide, OZ
Posts: 1,487
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Hyosung GT650
Re: QUICK QUESTION-Please answer fast
Hey Oz, the BBTB hasn't gone far this week (works been to busy, BUGGER) 02.gif
I am planning to make some headers 1 day, but 1st a front strut bar 8)
BTW Santa's bringing me a nice new Steering wheel this year, b/c I've been a good boy wink.gif :twisted:
I am planning to make some headers 1 day, but 1st a front strut bar 8)
BTW Santa's bringing me a nice new Steering wheel this year, b/c I've been a good boy wink.gif :twisted:
#50
Senior Member
Join Date: Sep 2006
Posts: 2,357
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Hyundai Fx Coupe
Re: Employment
QUOTE (col96fx)
BTW Santa's bringing me a nice new Steering wheel this year, b/c I've been a good boy wink.gif :twisted:
What style of steerer you goin' for?
I'm gonna get this one... maybe...
Nice & chunky!! 8)