Intake Manifolds
Thread Starter
Senior Member
Joined: Jun 2001
Posts: 139
Likes: 0
From: H-town, Texas
Vehicle: 99 Red Tib
Intake Manifolds
Are the intake manifolds for the 1.8 and 2.0 the same and are they interchangeable? Does anyone know roughly what it cost to get an intake manifold bored?
Administrator
Joined: May 2001
Posts: 23,226
Likes: 9
From: Upstate NY
Vehicle: 2010 Genesis 2.0T
Yeah...the 1.8 and 2.0 are exactly the same since they share the same head and block.
Pricing depends on where you go. You could do it yourself for practically nothing, but may not get the best results. Or you could go to a machine shop and have them do it professionally for a couple hundred. Just depends on what you want.
Pricing depends on where you go. You could do it yourself for practically nothing, but may not get the best results. Or you could go to a machine shop and have them do it professionally for a couple hundred. Just depends on what you want.
Administrator
Joined: Mar 2006
Posts: 12,515
Likes: 2
From: Lacey, WA
Vehicle: Two Accents, Mini, Miata, Van, Outback, and a ZX-6
You're using the Alpha DOHC intake manifold. You should be able to use any 1.5l DOHC or 1.6l DOHC Alpha intake manifold but not the 1.5l SOHC or 1.6l Beta intake manifold.
Junior Member
Joined: Mar 2010
Posts: 2
Likes: 0
Vehicle: 2008/hyundai getz 1.6
QUOTE (187sks @ Mar 9 2010, 12:40 PM)
You're using the Alpha DOHC intake manifold. You should be able to use any 1.5l DOHC or 1.6l DOHC Alpha intake manifold but not the 1.5l SOHC or 1.6l Beta intake manifold.
THANKS!SO 1.6 ALPHA ENGINE IM I CAN FIND IT AND FIT MY 1.6LGETZ!!
Moderator
Joined: May 2001
Posts: 7,166
Likes: 6
From: San Antonio, TEXAS!!!
Vehicle: 01 Tiburon Turbo, 99 Tiburon F2E, 2013 Avalon XLE Touring
QUOTE (Red Tib @ Jan 19 2010, 07:35 AM)
Are the intake manifolds for the 1.8 and 2.0 the same and are they interchangeable? Does anyone know roughly what it cost to get an intake manifold bored?
There are no gains by boring anything in the IM other than the throttlebody neck. Chop off the opening, and weld on a bigger flange. Chose a 65mm Mustang throttle body and flange.
