Hwarang Intake/Exhaust Camshaft
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 547
Likes: 0
From: New London, Tx AKA The Middle of Nowhere
I've been lookin at gettin some cams for my 97 tib(2.0L), but what I'm is if I get new cams will I have to readjust my cars computer do to the extra duration and if they will fit my tib and would I have to adjust the timing or anything like that. The one I'm lookin at can be seen here : http://shop.hyundaiperformance.com/shop/it...?i=HWA_CSB264PA
Yes they will work for your car.. Yes you will need to retune your computer or get safc2 because of the added air/fuel the cam allows in.. You will probably wanna get some headwork done, along w/ either the airram intake mani, or a p&p intake mani w/ larger throttle body.. If you dont do that, what will the cams do? laugh.gif
And no offense man, but try to re-read your post before you post it so we dont have to read through it twice to understand it laugh.gif
Not to hijack, but its ontopic w/ these cams.. They only list duration.. Do these cams have diff lobe centers or different lift than stock or just duration? If its just duration, I see these cams as being wayyyy overpriced for what they will provide.. Just my 2 cents..
And no offense man, but try to re-read your post before you post it so we dont have to read through it twice to understand it laugh.gif
Not to hijack, but its ontopic w/ these cams.. They only list duration.. Do these cams have diff lobe centers or different lift than stock or just duration? If its just duration, I see these cams as being wayyyy overpriced for what they will provide.. Just my 2 cents..
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 547
Likes: 0
From: New London, Tx AKA The Middle of Nowhere
Sorry bout that.
Whats a safc2? I was planning on getting an intake put on along with a full exuast system, never thought about the manifold.
Don't know, I will have too look into that.
Can any one recommend some cams?
Whats a safc2? I was planning on getting an intake put on along with a full exuast system, never thought about the manifold.
QUOTE
Do these cams have diff lobe centers or different lift than stock or just duration?
Don't know, I will have too look into that.
Can any one recommend some cams?
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 547
Likes: 0
From: New London, Tx AKA The Middle of Nowhere
Well I've heard ALOT of bad stuff about sharkracing's stuff, as for Catcams I haven't been able to find anything on them. Got any links?
Senior Member

Joined: Aug 2009
Posts: 11,992
Likes: 0
From: Washington D.C.
Vehicle: Hyundai Tiburon FX
i was looking at those too. $300? jeez, just for cams.
so you need to adjust your ECU when you put the cams in?
the safc2's. where do those go? and where can you buy them? which one is the better alternative?
so you need to adjust your ECU when you put the cams in?
the safc2's. where do those go? and where can you buy them? which one is the better alternative?
QUOTE (SplinterCeL)
Well I've heard ALOT of bad stuff about sharkracing's stuff, as for Catcams I haven't been able to find anything on them. Got any links?
look into www.speedstate.com I would go with these but that's just my preferance
HyundaiKitCoupe
S-AFC II is the name of a particular controller, made by Apex-i. Here's one I found on eBay : http://cgi.ebay.com/ebaymotors/ws/eBayISAP...ssPageName=WDVW .
As for where you can put it, you can put it anywhere you want. The most popular place is in the glove box, since you want to keep out of the sight of thieves.
Oh, and it would definitely be easier to just get the s-afc II. ECU modding isn't easy.
S-AFC II is the name of a particular controller, made by Apex-i. Here's one I found on eBay : http://cgi.ebay.com/ebaymotors/ws/eBayISAP...ssPageName=WDVW .
As for where you can put it, you can put it anywhere you want. The most popular place is in the glove box, since you want to keep out of the sight of thieves.
Oh, and it would definitely be easier to just get the s-afc II. ECU modding isn't easy.
Thread Starter
Senior Member
Joined: Jul 2004
Posts: 547
Likes: 0
From: New London, Tx AKA The Middle of Nowhere
Any one know the lift and duration of the Cat cams? And how much of a gain of horse power I would get if i got them with a CAI and full exuast with 2 1/4" piping all the way back.


