Dear Community

I`d like to do the captive to non captive swap.
I have also read any topic about it but iam quite not sure about the setup.
Is it right that i only need new front wheel hub from an Elantra ,new wheel bearings and new non captive rotors?

So is this wheel hub i found on ebay the right one : Elantra 99-00 Wheel hub for sale on Ebay

 

You'll need more than just the hub.

It'd be easier to just get the entire assembly off a wrecked non-captive Elantra or non-captive Tiburon.

 

You should do some real searching, I did a full DIY for the swap, it's pretty easy, including the parts you need.

 

i also tried searching for the swap when I bought my rims...

i never found anything that was too much of a help so i sold them sad.gif

id like to see what others have to say and show, because id really like to try and get a nice set of rims without having to worry about this

 

^^^^ But you have a RD2 therefore no need to worry.... scratchchin.gif

 

http://www.rdtiburon.com/index.php?showtop...&hl=captive


That took all of 2 seconds... full parts list and written by redzy

 

Thanks. Yeah, most of the noobs will go and do a search for something like....


"diy writup 4 captive two non captive rotorz"


When you just need to type in something like...

"captive rotor swap diy"

Or, god forbid, go to the DIY section and look at the FULL LISTING OF THE DIY'S ON THE SITE.

 

^^^ i used that diy when i did it and let me tell ya
1- well written, ez to understand
2- explains everything step by step
3- i am a complete noob to doin this kind of work and i was able to do the swap in like 2 1/2 hours. That was over a year and 1/2 ago and my wheels havent fallen off smile.gif