offsets and sizes
Guest
Posts: n/a
offsets and sizes
2001 Elantra, APEX 40mm drop want to put 17's and quite maybe 18's on it.
The lug pattern and sizes are 4.5" 4x114.3 right?
What offset should I use for each one. I want to be able to use 215's on it.
If I go with the 18's they will be 205's due to weight worries.
Thanks.
These should work right?
[ October 18, 2001: Message edited by: hawaiibullrider ]
The lug pattern and sizes are 4.5" 4x114.3 right?
What offset should I use for each one. I want to be able to use 215's on it.
If I go with the 18's they will be 205's due to weight worries.
Thanks.
These should work right?
[ October 18, 2001: Message edited by: hawaiibullrider ]
Super Moderator
Joined: May 2001
Posts: 11,851
Likes: 2
From: Rancho Palos Verdes, CA
Vehicle: 2008 Toyota Prius 2006 Suzuki SV650S
42's would probably rub with 215's on the inside edge on sharp corners.
35's would probably rub with 215's on the outside lip of the fender.
Stock offset is +42...so given the choice of the 2, I would go with the 35 rather than the 42. My 17's are 215 wide with a 38 offset, and I have no problems, but then again...I'm not lowered...yet!
35's would probably rub with 215's on the outside lip of the fender.
Stock offset is +42...so given the choice of the 2, I would go with the 35 rather than the 42. My 17's are 215 wide with a 38 offset, and I have no problems, but then again...I'm not lowered...yet!
Super Moderator
Joined: May 2001
Posts: 11,851
Likes: 2
From: Rancho Palos Verdes, CA
Vehicle: 2008 Toyota Prius 2006 Suzuki SV650S
QUOTE
Originally posted by Iago:
Correct me if I'm not looking at the chart right...but isn't the 35 offset only available for a five-lug rim?
Correct me if I'm not looking at the chart right...but isn't the 35 offset only available for a five-lug rim?
DOH! didn't even pay attention to that! U R right.
