wtb: stock exhaust manifold, 2.0 piston/rod, sunroof gasket
08-08-2010, 09:20 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2008
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Tiburon
wtb: stock exhaust manifold, 2.0 piston/rod, sunroof gasket
Hey all, need a few parts to get my car back to stock... Here's a list, let me know how much you want with shipping to Canada...
-stock exhaust manifold, preferably all the way down to and including the flex pipe
-one 2.0 piston/rod... I damaged mine during wrist pin removal
-sunroof weatherstripping
-clutch throwout bearing
-stock 2.0 ECU
I'll probably have more stuff for the list coming up... I'll also have a huge part out list including low comp pistons, and pretty much a bolt on turbo kit minus fuel tuning (the kit from Nightshark's car).
-stock exhaust manifold, preferably all the way down to and including the flex pipe
-one 2.0 piston/rod... I damaged mine during wrist pin removal
-sunroof weatherstripping
-clutch throwout bearing
-stock 2.0 ECU
I'll probably have more stuff for the list coming up... I'll also have a huge part out list including low comp pistons, and pretty much a bolt on turbo kit minus fuel tuning (the kit from Nightshark's car).
08-09-2010, 06:26 PM
#4
Senior Member
Thread Starter
Join Date: Jan 2008
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Tiburon
I've already paid for the piston/rod, but let me know what you want for the exhaust manifold. Does it have the flex pipe? What condition is it in? PM me if you'd like with price. Shipping to 865 Bancroft Dr, Sudbury, ON, Canada, P3B 1P6.
I also need both O2 sensors, a NEW set of gaskets if you have some lying around, NEW timing belt... I may also need an IAC w/ the connector from the wiring harness as well. I would also like to put on a kefico TPS if I can get a deal.
I'm restoring this to stock to sell it, but I'd still like to get good parts for the next owner.
I also need both O2 sensors, a NEW set of gaskets if you have some lying around, NEW timing belt... I may also need an IAC w/ the connector from the wiring harness as well. I would also like to put on a kefico TPS if I can get a deal.
I'm restoring this to stock to sell it, but I'd still like to get good parts for the next owner.
08-09-2010, 06:37 PM
#5
Senior Member
Join Date: Mar 2006
Posts: 5,754
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 1997 Tiburon
Headers have surface rust on them that can be easily cleaned up and refinished. Looking for 50$ for it with flexpipe. New they went for 400$. Not sure how much shipping is, but I'm from Windsor Ontario, shouldn't be more then 30$.
Got an IAC and kefico tps. I can do $30 for both and throw it into the header box so you dont have to pay extra in shipping.
Got an IAC and kefico tps. I can do $30 for both and throw it into the header box so you dont have to pay extra in shipping.
08-09-2010, 09:36 PM
#6
Senior Member
Thread Starter
Join Date: Jan 2008
Posts: 741
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Tiburon
Done! Is there a spot for an O2 sensor? If not I'm guessing I'll just have to extend the wiring? Let me just double check I need the IAC, and see if I need anything else you may have.
edit: Do you happen to have that sunroof weatherstripping?
edit 2: Updated List of Items I Need
-sunroof weatherstripping
-clutch throwout bearing
-RD2 stock 2.0 ECU
-new gasket set
-both O2 sensors
-new timing belt
-single din surround RD2
edit: Do you happen to have that sunroof weatherstripping?
edit 2: Updated List of Items I Need
-sunroof weatherstripping
-clutch throwout bearing
-RD2 stock 2.0 ECU
-new gasket set
-both O2 sensors
-new timing belt
-single din surround RD2