Wtb Stage 3 Pressure Plate
05-23-2006, 01:41 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2006
Location: Tampa/St Petersburg
Posts: 4,334
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Turbocharged 2001 Hyundai Tiburon
OK guys i think i know whats up with my tragedy of a clutch installation, after tearing off the tranny for the 4th time.
I believe the ring that holds the snap ring in place is damaged somewhat, which is preventing the throwout bearing from snapping into place; I may be able to mess with it to make it work again but i was just hoping if anybody has replaced their performance clutch they might have their old pressure plate laying around and i could use that.
I was really hoping to have my car back up and running by the 23rd (my b-day) but it seems that wish goes down the shitter along with this goddamn clutch install.
So if anybody has a stage 3 pressure plate or maybe even a stage 2 pressure plate laying around id really appreciate it if you could sell it to me for a reasonable price, thanks guys
Bump? help me out guys...
I believe the ring that holds the snap ring in place is damaged somewhat, which is preventing the throwout bearing from snapping into place; I may be able to mess with it to make it work again but i was just hoping if anybody has replaced their performance clutch they might have their old pressure plate laying around and i could use that.
I was really hoping to have my car back up and running by the 23rd (my b-day) but it seems that wish goes down the shitter along with this goddamn clutch install.
So if anybody has a stage 3 pressure plate or maybe even a stage 2 pressure plate laying around id really appreciate it if you could sell it to me for a reasonable price, thanks guys
Bump? help me out guys...
05-23-2006, 05:20 PM
#4
Senior Member
Thread Starter
Join Date: Mar 2006
Location: Tampa/St Petersburg
Posts: 4,334
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Turbocharged 2001 Hyundai Tiburon
LOL what do you mean what do i mean? i need a pressure plate off somebodys old stage 3 clutch hehe. yah and your selling the whole clutch i just need the pressure plate...
05-23-2006, 05:24 PM
#5
Senior Member
Join Date: Mar 2006
Location: tacos
Posts: 9,533
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2000 Elantra
well for example
act doesnt have stages they have hp ratings
specs stage 3(crap btw) isnt the same as clutchmasters stage 3
get my drift? how much hp are you wanting it to hold? clutchnet has a race plate for like 130 bux
act doesnt have stages they have hp ratings
specs stage 3(crap btw) isnt the same as clutchmasters stage 3
get my drift? how much hp are you wanting it to hold? clutchnet has a race plate for like 130 bux
05-24-2006, 05:19 PM
#6
Senior Member
Thread Starter
Join Date: Mar 2006
Location: Tampa/St Petersburg
Posts: 4,334
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: Turbocharged 2001 Hyundai Tiburon
id like it to be good up to 300 or so. 250 at the least...
mine was rated at 270 something i think
--------------------------------------------------------------
********************************************
---------------------------------------------------------------
Ok nobody has one? What is everybody doing with their old ones?
I found a few places that sell them for us at a reasonable price, heres one
ACT Pressure plate
But the images dont show it coming with the center section, does it not come with that? Is that something you can buy seperatly? whats the name of that?
Or is that just a picture of a push type pressure plate?
mine was rated at 270 something i think
--------------------------------------------------------------
********************************************
---------------------------------------------------------------
Ok nobody has one? What is everybody doing with their old ones?
I found a few places that sell them for us at a reasonable price, heres one
ACT Pressure plate
But the images dont show it coming with the center section, does it not come with that? Is that something you can buy seperatly? whats the name of that?
Or is that just a picture of a push type pressure plate?
05-30-2006, 11:17 PM
#7
http://www.hyundaiaftermarket.org/images/vendor1.png
Join Date: May 2002
Location: Canada
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: x3 accent gk tiburon santa fe
you can get the snap ring at the dealer..
cost around 1$ ;-)
also check your release bearing so that the groove is is "square" not rounded from wear
cost around 1$ ;-)
also check your release bearing so that the groove is is "square" not rounded from wear
05-30-2006, 11:39 PM
#9
http://www.hyundaiaftermarket.org/images/vendor1.png
Join Date: May 2002
Location: Canada
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: x3 accent gk tiburon santa fe
BTW,
i've came across this 2 times with the F1 grip force clutch,
snap ring looked like a used one,it was squared off a bit instead of been round
this made the TOB very hard to clip in
i've came across this 2 times with the F1 grip force clutch,
snap ring looked like a used one,it was squared off a bit instead of been round
this made the TOB very hard to clip in