Ok, I really need a slim radiator fan. If someone has one for sale, or knows where I can get one, I'd really appreciate it.

The reason I need one is because the Maintec GT Headers won't fit because the radiator fan is to big. Yes, boys and girls, if you've got these headers, you MUST get a slimmer rad. fan. No if's, and's, or but's about it.

REDZ, if you read this, either you or David need to add a little disclaimer to the product page.

 

damn, those things must be freaking huge.

 

The problem is that they go out too far. Whereas normal headers usually go straight down(sorta), these go out, arch upwards, go out a little futher, then arch downwards. The biggest problem is the stupid fins on the stock fan.

 

HP sells them. After looking around for a few hours they do have the best price on them. I believe I paid $240 or so for the set.

 

I know a guy that sells these for $60 each shipped, 12"x12"x2.5" dimensions, I think he said they flow around 1200-1400cfm. I bought a couple myself, but have not installed them on my car. I hooked them up to an old battery and they definately flow wink1.gif. If you're interested let me know and I'll see what I can do. I can also take some pics if you want.

 

I'll post prices for FAL fans tomorrow in the FlyRyde vendors section, I'll also post one right now to ask what you guys want prices on.

 

Ultra - How think are they? I think HP lists them as 3" thick, which I don't think is too much thinner than the stock ones.

a_gut -I'm definitely interested in those. Pics would be great too.

 

Well I just ordered them last week. I should get them this week. I will measure the stock ones tomorrow and let you know the difference once the new ones come in. Tim (speed-factor) said that if you really want room to mount them on the other side of your radiator. You would probably need to take off the bumper to do this.

-EDIT-

Here are the specifics from Flex-a-lite's site on the 220 fans:

Size: 15 1/2" x 26 1/4" x 2 5/8"
Diameter: 2 x 12"
Speed: 2000 RPMS
Airflow-Cu. Ft./Min. at 0º Static Pressure: 2500
Amp Draw: 19.5
Mounting System: Thru Core or Bracket
Adj. Thermostat 180º-240º: No
Air Conditioning Relay: No
Number of Blades/Fan Blade Angle: 10/21°

 

dude i suggest getting them from here...http://www.precisionracingonline.com/bulk_...bb/fans_bb.html tell them that chris sent yah we'll take care of yah over at pro...thanks Chris oh yeh and if you want more info let me know I can get tons..chris

 

I dont know about those... They are the same price with less than half the CFM.