Wtb: Rd2 Parts
05-27-2005, 01:40 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
As per my story here...
http://www.rdtiburon.com/index.php?showtopic=8349
I need some parts for Lizgiggle's car.
Here's what I've got for it allready. (I've got lots of aftermarket stuff for it too, heh heh...)
Brand new Front Bumper, Support (Installed), Radiator (Installed), 2 fenders, 2 headlights, 2 corners. My REDZ Mako Hood is going on it.
Next week I am ordering the front clip, got a really good deal on it locally, brand new, for $139 plus tax. Only other stuff I can see that I need are the AC parts that were destroyed in the accident. Everything from them down tubes forward.
1. AC Dryer and bracket.
2. Tubes to and from the dryer (I have the ones from inside the car out.)
3. AC Condenser
4. Battery Tray and Clamp
5. Wire Retaining Clips for MAF sensor, IAT sensor, and Idle Bypass Valve sensor.
6. Marker Lights and bulbs
7. Tow Hook - (In negotiations with seller)
From looking at the pics what else do I need? Anyone have any of these parts they can hook me up with?
I don't need fans, as I'm getting FAL 220's for my ride and my GT Headers, she's getting my OEM ones. I also have the upper radiator mounts and bolts.
http://www.rdtiburon.com/index.php?showtopic=8349
I need some parts for Lizgiggle's car.
Here's what I've got for it allready. (I've got lots of aftermarket stuff for it too, heh heh...)
Brand new Front Bumper, Support (Installed), Radiator (Installed), 2 fenders, 2 headlights, 2 corners. My REDZ Mako Hood is going on it.
Next week I am ordering the front clip, got a really good deal on it locally, brand new, for $139 plus tax. Only other stuff I can see that I need are the AC parts that were destroyed in the accident. Everything from them down tubes forward.
1. AC Dryer and bracket.
2. Tubes to and from the dryer (I have the ones from inside the car out.)
3. AC Condenser
4. Battery Tray and Clamp
5. Wire Retaining Clips for MAF sensor, IAT sensor, and Idle Bypass Valve sensor.
6. Marker Lights and bulbs
7. Tow Hook - (In negotiations with seller)
From looking at the pics what else do I need? Anyone have any of these parts they can hook me up with?
I don't need fans, as I'm getting FAL 220's for my ride and my GT Headers, she's getting my OEM ones. I also have the upper radiator mounts and bolts.
05-27-2005, 02:31 PM
#2
Senior Member
Join Date: Jul 2001
Location: Winnipeg
Posts: 4,828
Likes: 0
Received 0 Likes
on
0 Posts
1. AC Dryer and bracket.
97801-29000 & 97851-27000
The friggin dryer is like over $200, hope Kspec can hook ya up, or go to a jukie
2. Tubes to and from the dryer (I have the ones from inside the car out.)
97768-27000 & 97761-27000 They come as Tubes and Orings
Orings should come with them tubes, but if not orings are 97690-37010
Not sure if you need the LONG Honking tubes, but the upper one is:
97767-29010 Extra long one
Lower one is 97766-29310
3. AC Condenser
97606-27060 Again Hella expensive Over $700 new
4. Battery Tray and Clamp
37150-29110 & 37160-29000 The bolt for the clamp is 11290-08351
5. Wire Retaining Clips for MAF sensor, IAT sensor, and Idle Bypass Valve sensor.
As per MSN,... WTF!!! tongue.gif
6. Marker Lights and bulbs
If you mean those little square ones, they are:
LH 92301-27590
RH 92302-27590
And the bulbs are just 194's
97801-29000 & 97851-27000
The friggin dryer is like over $200, hope Kspec can hook ya up, or go to a jukie
2. Tubes to and from the dryer (I have the ones from inside the car out.)
97768-27000 & 97761-27000 They come as Tubes and Orings
Orings should come with them tubes, but if not orings are 97690-37010
Not sure if you need the LONG Honking tubes, but the upper one is:
97767-29010 Extra long one
Lower one is 97766-29310
3. AC Condenser
97606-27060 Again Hella expensive Over $700 new
4. Battery Tray and Clamp
37150-29110 & 37160-29000 The bolt for the clamp is 11290-08351
5. Wire Retaining Clips for MAF sensor, IAT sensor, and Idle Bypass Valve sensor.
As per MSN,... WTF!!! tongue.gif
6. Marker Lights and bulbs
If you mean those little square ones, they are:
LH 92301-27590
RH 92302-27590
And the bulbs are just 194's
05-27-2005, 02:51 PM
#3
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Actually I meant the Bulb Holders.
Wow, thanks Kayjai.
For the tubes, I don't need the long upper ones mang. Just from where they stop and forward.
Wow, thanks Kayjai.
For the tubes, I don't need the long upper ones mang. Just from where they stop and forward.
05-27-2005, 03:08 PM
#4
Senior Member
Join Date: Nov 2003
Location: Rancho Palos Verdes, CA
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Hood Prop rod
Hood locking Latch
Vertical support for Hood Latch (from lower cross brace to upper cross brace. Hood latch mounts to it)
Hood Latch cable (might be there?)
To be honest, I would replace that entire front clip/nose section That thing is looking seriously mangled...
Hood locking Latch
Vertical support for Hood Latch (from lower cross brace to upper cross brace. Hood latch mounts to it)
Hood Latch cable (might be there?)
To be honest, I would replace that entire front clip/nose section That thing is looking seriously mangled...
05-27-2005, 07:52 PM
#6
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
QUOTE (Random @ May 27 2005, 03:08 PM)
Hood Prop rod
Hood locking Latch
Vertical support for Hood Latch (from lower cross brace to upper cross brace. Hood latch mounts to it)
Hood Latch cable (might be there?)
To be honest, I would replace that entire front clip/nose section That thing is looking seriously mangled...
Hood locking Latch
Vertical support for Hood Latch (from lower cross brace to upper cross brace. Hood latch mounts to it)
Hood Latch cable (might be there?)
To be honest, I would replace that entire front clip/nose section That thing is looking seriously mangled...
The Prop rod, I think is in the trunk. I need the clip that holds it too though.
The hood latch assy is still in place, not damaged at all.
Cable is A OK too.
As for the whole clip...
QUOTE (REDZMAN @ May 27 2005, 01:40 PM)
Next week I am ordering the front clip, got a really good deal on it locally, brand new, for $139 plus tax. Only other stuff I can see that I need are the AC parts that were destroyed in the accident. Everything from them down tubes forward.
ninja.gif :unsure:
tongue.gif laugh.gif Thanks brotha.
QUOTE (Agarwal @ May 27 2005, 03:23 PM)
I got an AC Condenser; I'd need to check what tubes I got with it.
Fantastic, can I get them?
05-27-2005, 11:57 PM
#8
Senior Member
Thread Starter
Join Date: Mar 2002
Location: Los Lunas, New Mexico, USA.
Posts: 34,642
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
I said "GET". As in recieve. LOL
Payment can be arranged when a price is discussed. What ya got?
Payment can be arranged when a price is discussed. What ya got?