WTB: O2 Harness
#2
Senior Member
Join Date: May 2008
Location: California
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001/Hyundai/Tiburon
Which side is that on? The sensor cable or the one coming from the cars wiring harness? I cut both my connectors off and crimped the wires together on my car so I might have the old ones laying around.
#4
Senior Member
Join Date: May 2008
Location: California
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001/Hyundai/Tiburon
I just looked at my car and it was the rear sensor that I had bypassed the connector on and not the front. Since you would have to crimp on a different connector anyway why not just cut the old connector off and crimp the sensor wires to the ecu wires? Also you could try a junk yard and probably only pay a few bucks for it.
#5
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Tampa,Fl
Posts: 1,305
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 2001 Hyundai Tiburon
Yea but I wanted to have one for my wideband for the megasquirt then one if I need to switch out the my stock o2. Junk yard I went to didn't have.