WTB: HD Engine Mounts (Roll Stops)
07-03-2011, 02:03 PM
#1
Super Moderator
Thread Starter
Join Date: Dec 2001
Location: Houston, Texas
Posts: 1,792
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 14 EGT 2.0
WTB: HD Engine Mounts (Roll Stops)
I have no idea why you would have them laying around, but if you do and want to get rid of them let me know. My car isn't stopped long enough to let 3M cure and I don't like how much the engine moves around. This may be removed once I make the XD legal to drive again and can park the HD.
07-04-2011, 07:41 AM
#2
Super Moderator
A spare set from a junkyard or wherever will sit around long enough for rocks to turn into dinosaurs. They can't be THAT expensive.
ETA: I think I have a set laying around from my 2000. They were replaced with filled mounts I got off the parts car, is why I have them laying around. I don't know if they would fit an XD.
ETA: I think I have a set laying around from my 2000. They were replaced with filled mounts I got off the parts car, is why I have them laying around. I don't know if they would fit an XD.
07-04-2011, 03:27 PM
#3
Super Moderator
Thread Starter
Join Date: Dec 2001
Location: Houston, Texas
Posts: 1,792
Likes: 0
Received 0 Likes
on
0 Posts
Vehicle: 14 EGT 2.0
This is for the HD. If they work (have not gone under them) Then I could swap them over from the XD and fill the HDs. For some reason I thought they were way off, I know the side mounts are.. I was going to try and get a torque dampener to work but the mount isn't even close.