I have a Turbonetics T3/T4 Turbo and need the plumbing for the intake side. I have a CAI, so wont need that section, but looking for piping from the Air Filter to Turbo, Turbo to FMIC, and FMIC to CAI. Im guessing 2.5 or 3 inch. Probally 2.5 inch. New or Used, what ever you got. I really dont want to have to fabricate my own. Oh, I have a 2000 RD2 if that helps. Thanks in advance.

 

... You are kidding me right?

You can't use a CAI with your turbo, it won't work. The piping is complex. You'd have to cut the hell out of it to use it at all.

You need to give some info on what turbo, manifold, ect.

 

Ive always heard of people using thier CAI piping instead of having to fabricate more piping. But either way, I have the Turbonetics T3/T4 Hybrid turbo with the OBX turbo manifold. Heres a pic of the manifold and turbo. The Turbo has 3 inch inlet and 2 inch outlet.
Manifold
Turbo
I also have the FMIC with 2 inch inlets. Im not sure what else I need to give, so If Im missing anything important let me know.

 

Some ppl hack up CAIs. I would choose your boost you want and do all calculations on the correct size tubing first. Remember mandrel>>crush

 

Im looking to run 7psi maybe 8 tops. Would prefer the mandrel.

 

All I'm going to say is that I think you need to do some more reading and research before you go turbo.
Search this site.

 

get some mandrels from summit racing and hack them to fit

look up "dynomax tubing" and you should find it its like 15 bux for a 45 degree mandrel bend i think they got u bends also

 

I have Alpine Intercooler piping and D/P for sale if your intrested
Heres the pic
http://memimage.cardomain.net/member_image...37_283_full.jpg
Email me back at UNIQ74@sympatico.ca if your intrested fing02.gif

 

Here you go... http://search.ebay.com/search/search.dll?c...ping&category0=