Korean-style License Plates
Thread Starter
Senior Member
Joined: Mar 2006
Posts: 1,276
Likes: 0
Vehicle: 2000 Turbulence
I asked Draguntib about getting these made for us, here's the response.
If you missed that thread, some of us were talking about the korean-style license plates, and a few members mentioned that they got theirs through you. Are you still offering these? If so, I think there's at least 3 of us that are interested.
Thanks,
- Mike
Hello,
Im hardly ever on here much so i guess i did miss it. Yes i made a few sets a while back for some of the members and could do it again but i need at least 10-12 orders before i can get them made. Thanks
So. Anyone else interested?
QUOTE
QUOTE
If you missed that thread, some of us were talking about the korean-style license plates, and a few members mentioned that they got theirs through you. Are you still offering these? If so, I think there's at least 3 of us that are interested.
Thanks,
- Mike
Hello,
Im hardly ever on here much so i guess i did miss it. Yes i made a few sets a while back for some of the members and could do it again but i need at least 10-12 orders before i can get them made. Thanks
So. Anyone else interested?
Senior Member
Joined: Mar 2006
Posts: 7,799
Likes: 0
Vehicle: 2001 Hyundai Tiburon
id be in for another set probably. draguntib, you can still do window banners and all that right? what is the best way to get a hold of you for things to get made? thanks and sorry for the little bit of off topic
Senior Member
Joined: Sep 2006
Posts: 644
Likes: 0
From: Hollywood, FL
I would like to place an order for the now "old style" KDM license plate, green with white letters, with J3R inside the Korean writing.
any thing around 15, or 20 and you'll have a deal. PM me for any other needs if you do decide to take this offer. and possibly give a quote.
thanks
Jer
p.s. if the majority wants the new style, ill go with that just lemme know.
any thing around 15, or 20 and you'll have a deal. PM me for any other needs if you do decide to take this offer. and possibly give a quote.
thanks
Jer
p.s. if the majority wants the new style, ill go with that just lemme know.
Senior Member
Joined: Sep 2006
Posts: 644
Likes: 0
From: Hollywood, FL
old.
http://www.pl8s.com/s/img-skor.jpg
new.
http://www.olavsplates.com/submissions/rok_173891.jpg
(or it should look sum thing like this^^^^^^)
http://www.pl8s.com/s/img-skor.jpg
new.
http://www.olavsplates.com/submissions/rok_173891.jpg
(or it should look sum thing like this^^^^^^)
Senior Member
Joined: Aug 2004
Posts: 1,282
Likes: 0
From: Claremore, OK
All i need to do this is 10+ paid orders. Due to recent gas hikes and all that jazz the price has gone up a little bit from the last time i ran these. For 10+ orders your going to be looking at $13-$15 each. 15+ orders and price will drop to $10-$12 each. Moslty depends on shipping address and all that. No problem in doing it still have all the stuff needed just have to order the blanks.
-Ericy321
Yes i still do that. Can actually do much more than i used to be able to do now that i have a 54" cutter. So i still have some limits just not as many as i did back when i did the last set.
-Ericy321
Yes i still do that. Can actually do much more than i used to be able to do now that i have a 54" cutter. So i still have some limits just not as many as i did back when i did the last set.
