How do we find CNK Pistons?
Thread Starter
Senior Member
Joined: May 2001
Posts: 557
Likes: 0
From: Mesa, AZ
Vehicle: 2007 Tiburon
How do we find CNK Pistons?
Wanted to know because I wanted to get a good set thats able to hold 300plus HP, and is 0.020 over in size.
I am going to be shopping for the next 2 weeks, and I heard yall had some. How do I order?
Check Sig for make of vehicle:
[ January 29, 2003, 04:17 AM: Message edited by: KillerShark68 ]
I am going to be shopping for the next 2 weeks, and I heard yall had some. How do I order?
Check Sig for make of vehicle:
[ January 29, 2003, 04:17 AM: Message edited by: KillerShark68 ]
Senior Member
Joined: Dec 2002
Posts: 296
Likes: 0
Pistons I machine myself. They are 82mm bore which is stock bore. 0.020" is 0.5mm, which leaves you with an 82.5mm bore.
The good news.... I can help you! I can also help you out with 83mm, and 83.5mm bores aswell.
Costing is no longer through an agent --- After the HP.COM forum incident with an uninformed HP.COM representative, I removed their agency!
Pricing is now $250.00 for the set of 4 with rings! This was reduced from the $330.00 sold through the dealership. You can expect pricing to come down drastically on ALL components in future as there will be no agency enstated at all for CNK products! - not negotiable!
The good news.... I can help you! I can also help you out with 83mm, and 83.5mm bores aswell.
Costing is no longer through an agent --- After the HP.COM forum incident with an uninformed HP.COM representative, I removed their agency!
Pricing is now $250.00 for the set of 4 with rings! This was reduced from the $330.00 sold through the dealership. You can expect pricing to come down drastically on ALL components in future as there will be no agency enstated at all for CNK products! - not negotiable!
Thread Starter
Senior Member
Joined: May 2001
Posts: 557
Likes: 0
From: Mesa, AZ
Vehicle: 2007 Tiburon
Well I dont quite know what to say about the replies...on MY post suicide BUT 
thanks for the info. I will need to order a set from ya. Can you give me specific instructions as to how to order the pistons since they are not shown on your site? lol
GUYS please play nice I would hate 2 see this type of treatment
towards one another. That just reminded me of all the Flaming that went on over when FxTreme was up and running poke
email me
at: poloblue@msn.com K
Lata
[ January 29, 2003, 05:24 PM: Message edited by: KillerShark68 ]
thanks for the info. I will need to order a set from ya. Can you give me specific instructions as to how to order the pistons since they are not shown on your site? lol GUYS please play nice I would hate 2 see this type of treatment
towards one another. That just reminded me of all the Flaming that went on over when FxTreme was up and running poke email me
at: poloblue@msn.com K Lata
[ January 29, 2003, 05:24 PM: Message edited by: KillerShark68 ]
Senior Member
Joined: Mar 2002
Posts: 34,642
Likes: 0
From: Los Lunas, New Mexico, USA.
Vehicle: 2001 Hyundai Tiburon, 2004 Kia Sorento, 2010 Kia Soul
Well, don't forget Autobot, just because someone isn't a paid employee, the internet makes you assume things.
When I first started on here, I of course thought a Mod worked for the company. I know now that I'm wrong, but how many other people whore like I do? Plenty of people can and DO get turned off from buying products from companies who have people that act they way they do in the forums, paid employees or not. (IE: Yamenyanko)
I'm not trying to stir this up, just tryin to help.
When I first started on here, I of course thought a Mod worked for the company. I know now that I'm wrong, but how many other people whore like I do? Plenty of people can and DO get turned off from buying products from companies who have people that act they way they do in the forums, paid employees or not. (IE: Yamenyanko)
I'm not trying to stir this up, just tryin to help.
Senior Member
Joined: Jul 2001
Posts: 691
Likes: 0
From: parkville, md
Vehicle: 1997 accent L
Instead of spending $300+ on questionable Hyper-U pistons, why not just save another $250-350 and get race proven Ross, Arias, or Wiseco forged pistons? Esp. considering the Wiseco pistons are fine for street motors due to their composition (though they are the priciest at $650 a set). Its what the Koreans use.
[ January 29, 2003, 11:10 PM: Message edited by: CNK Performance ]
[ January 29, 2003, 11:10 PM: Message edited by: CNK Performance ]
Senior Member
Joined: Aug 2001
Posts: 5,550
Likes: 0
detonation and bad luck were the reason my CNK Piston in cyl#2 failed
I was using them with nitrous...
Hyper U's are known to be sensitive to detonation...
So hyper U's really arent good nitrous pistons... since most nitrous kits can sometimes be unpredictable
When used with a turbo.... well... batlord has pulled 260 something to the wheels already..
He is using the CNK pistons...
If tuned correctly... they shouldint have a problem reaching 300whp
ok... im leaving now before autobot bitch slaps me
eek!
I was using them with nitrous...
Hyper U's are known to be sensitive to detonation...
So hyper U's really arent good nitrous pistons... since most nitrous kits can sometimes be unpredictable
When used with a turbo.... well... batlord has pulled 260 something to the wheels already..
He is using the CNK pistons...
If tuned correctly... they shouldint have a problem reaching 300whp
ok... im leaving now before autobot bitch slaps me
eek!
Senior Member
Joined: Dec 2002
Posts: 296
Likes: 0
The pistons are able to handle up to around 300WHP or thereabouts... I have made much more power with them before, but I don;t advertise this for safety and buffer reasons.
Jaws -- you forgot to mention that even though that cylinder detonated badly and the piston was destroyed - I replaced it free of charge anyways.
Payment is accepted via direct wire T/fer Killershark. Mail me for details at cnkperformance@hotmail.com
Jaws -- you forgot to mention that even though that cylinder detonated badly and the piston was destroyed - I replaced it free of charge anyways.
Payment is accepted via direct wire T/fer Killershark. Mail me for details at cnkperformance@hotmail.com
Senior Member
Joined: Aug 2001
Posts: 5,550
Likes: 0
QUOTE
CNK Performance:
Jaws -- you forgot to mention that even though that cylinder detonated badly and the piston was destroyed - I replaced it free of charge anyways.
Sorry its late and im pretty much drunk nowJaws -- you forgot to mention that even though that cylinder detonated badly and the piston was destroyed - I replaced it free of charge anyways.
lol
23:30 hours before i turn 21
oh wait...
23:30 plus one more day
arg...
BTW.. he also replaced the rings
Super Moderator
Joined: May 2001
Posts: 11,851
Likes: 2
From: Rancho Palos Verdes, CA
Vehicle: 2008 Toyota Prius 2006 Suzuki SV650S
QUOTE
REDZMAN:
Well, don't forget Autobot, just because someone isn't a paid employee, the internet makes you assume things.
When I first started on here, I of course thought a Mod worked for the company. I know now that I'm wrong, but how many other people whore like I do? Plenty of people can and DO get turned off from buying products from companies who have people that act they way they do in the forums, paid employees or not. (IE: Yamenyanko)
I'm not trying to stir this up, just tryin to help.
This is the whole reason I put LOGO'S next to folks names, so they know who/what they are associated/affilated with.
Well, don't forget Autobot, just because someone isn't a paid employee, the internet makes you assume things.
When I first started on here, I of course thought a Mod worked for the company. I know now that I'm wrong, but how many other people whore like I do? Plenty of people can and DO get turned off from buying products from companies who have people that act they way they do in the forums, paid employees or not. (IE: Yamenyanko)
I'm not trying to stir this up, just tryin to help.