general engine parts
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Location: Los Angeles
Posts: 2,005
Likes: 0
Received 0 Likes
on
0 Posts
lots of stuff
Hey whats up rick
This is Hanibal, i talked with you for awhile at one of the bbqs. Im the guy with the silver tiburon.
Just wondering if you can source some stuff out for me and give me a rough estimate. Im trying to see if whether its worth the hassle to get this stuff from korea. I remember getting parts like these was SOOOOOOOOOOOOOOOOOOOOOOOO much cheaper over there..
Well
Head gasket
crankcase gasket (the on the flywheel side, gasket that keeps oil from entering towards the flywheel... not the round plastic one,.. i need the gasket that 5 bolts go through... um could be 6 bolts)
valves and springs (head)
i need to replace all of them
I have the valve seals
Do you guys any performance packages? Larger ports? If you can please give me stock replacement prices as well as aftermarket ones.
If you want to work something out.. i can do a before and after dyno.
I have a haltec and a wideband, so tuning is free. Would be nice to know how much we can gain with a somewhat decent head.
head bolt set
2 m12s
8 m10s
I think its 8 of them.. not sure
intake manifold gasket
hood latch assembly... mine got rusty, so i ended up cracking my zefiro hood trying to close the bish. :x
bearings
rod and crank along with the 2 "spacers" (shims) on the crank between cyl 2 and 3
Well thats it for now
Let me know what you can get or what you dont want to bother getting (as savings might not be worth it).
Ive purchased everything except the hood latch locally so i got an idea of what it cost state side.
Shipping..
Well i can pick it up from your house
tongue.gif
j/k
I can go to your shop or we can meet at a bbq.
This is Hanibal, i talked with you for awhile at one of the bbqs. Im the guy with the silver tiburon.
Just wondering if you can source some stuff out for me and give me a rough estimate. Im trying to see if whether its worth the hassle to get this stuff from korea. I remember getting parts like these was SOOOOOOOOOOOOOOOOOOOOOOOO much cheaper over there..
Well
Head gasket
crankcase gasket (the on the flywheel side, gasket that keeps oil from entering towards the flywheel... not the round plastic one,.. i need the gasket that 5 bolts go through... um could be 6 bolts)
valves and springs (head)
i need to replace all of them
I have the valve seals
Do you guys any performance packages? Larger ports? If you can please give me stock replacement prices as well as aftermarket ones.
If you want to work something out.. i can do a before and after dyno.
I have a haltec and a wideband, so tuning is free. Would be nice to know how much we can gain with a somewhat decent head.
head bolt set
2 m12s
8 m10s
I think its 8 of them.. not sure
intake manifold gasket
hood latch assembly... mine got rusty, so i ended up cracking my zefiro hood trying to close the bish. :x
bearings
rod and crank along with the 2 "spacers" (shims) on the crank between cyl 2 and 3
Well thats it for now
Let me know what you can get or what you dont want to bother getting (as savings might not be worth it).
Ive purchased everything except the hood latch locally so i got an idea of what it cost state side.
Shipping..
Well i can pick it up from your house
tongue.gif
j/k
I can go to your shop or we can meet at a bbq.
#2
pics
Is not easy buying such parts for you from here asking someone in Korea.
Yeah..the stock parts should be definitely cheaper than US.
Please send PM or e-mail to hongkuo@sbcglobal.net for US part numbers and the link if possible from Hyundaiservice Webtech.
If I were in Korea, I would of just go and pick one each for you.
Also, list them as 1, 2, 3, 4, orders...
Yeah..the stock parts should be definitely cheaper than US.
Please send PM or e-mail to hongkuo@sbcglobal.net for US part numbers and the link if possible from Hyundaiservice Webtech.
If I were in Korea, I would of just go and pick one each for you.
Also, list them as 1, 2, 3, 4, orders...